ViewSonic DP701W4, VS11960 manual USB, Connected to PC Installation, USB is connected to PC

Page 7

The screen will return to Home Menu.

5.USB, Connected to PC Installation

When mini-USB connector is connected to a PC, the PC will serve as a host device and DP701WF will serve as an external storage device to the PC (like a card reader).

From DP701WF’s Side

5-1 Message of “Connected; Will return to

normal operation after disconnection” will

pop up.

Fig. 5-1 USB is connected to PC

From PC’s Side

The PC setup is same as a standard USB storage device. Windows XP should be able to automatically recognize DP701W4 as a “USB Mass Storage Device” without performing any manual installation. However, in case of driver is not automatically installed, the following process will take place:

Fig. 5-2 Windows New Hardware Wizard, Screen 1

5-2 Select “No, not this time” when prompt to connect to Windows update.

If Windows fails to locate the proper driver in the installation. Select “Yes, this time only”. This operation requires an internet connection.

Click “Next >” to continue.

6

Image 7
Contents ViewSonic Delete, Single File Home Menu Copy, Single File File Management Copy, All Files Delete, All Files Delete, Single FileUSB is connected to PC USB, Connected to PC InstallationSelect Install the software Installation Complete USB, Connected to PC Operation USB, Connected to OTG On The Go Device