Philips Colour Observation Camera manual Technical specifications

Page 8

Technical specifications

Pick-up element

1/3" solid state CCD

Pixel elements 5

12 (H) x 582 (V), PAL interlaced, or 512(H) x 492 (V), NTSC

 

interlaced

Resolution

330 TVL

Gain control

automatic

Lens

See: Using a different lens

Iris

Electronic iris

 

When connected, an auto-iris lens overrides the electronic iris.

Light sensitivity

• 0.3 lux minimally acceptable picture with standard lens (F1.2)

 

at 3200K, transmission 86%, scene reflection 100%

 

• 0.5 lux, 50ire (-6dB) with standard lens (F1.2) at 3200K,

 

transmission 86%, scene reflection 100%

Scene illumination

Not for continuous use above 2k lux with standard lens (F1.2)

 

For outdoor use an auto-iris lens is recommended.

Signal to noise ratio

48dB at 200-25000 lux, 25°C

White balance TTL

range 2500-6500K

System connector (output)

RJIIE plug

Microphone

Built-in, can be switched off at the camera.

• Frequency range

300-3000Hz

Synchronisation

The camera automatically synchronises to the system monitor.

Power supply

24VDC, when the system-cable length exceeds 200m/600ft a power-

 

adapter (24VDC, current limit 500mA) is required (available as

 

accessory)

Power consumption

≤ 3W

System-cable length

max. 300m/900ft (when a mains power adaptor is used)

Dimensions

72,5 (H) x 70 (W) x 60 (D) mm (excl. lens)

Weight

190g

Connectors

 

• System cable

RJ11E modular ("telephone" plug)

• External power

Power jack

Auto-iris control

4-pole socket, passive Auto-iris, direct drive

Mounting

1/4" 20 UNC

Ambient temperature

 

• Operating

-10 to +50°C

• Storage

-25 to +70°C

Ambient humidity

 

• Operating

20 to 90% RH

• Storage

up to 99% RH

The pin connections of the auto-iris connector are: pin 1 = control coil -

pin 2 = control coil + pin 3 = drive coil - pin 4 = drive coil +

4 2

3 1

CL 66610005_309.AI

88

Image 8
Contents Table of contents IntroductionInstallation Connection and operation facilitiesCamera Video Audio Out out VCR aux Power MW1999COC01.AI Loosen knob 4 and screw Slightly figure below Aim the camera at an object at least 15 metres/45 feet away Using a different lens Perform the following steps to change a lensSystem Cable Tips for maintenanceCleaning Technical specifications

Colour Observation Camera specifications

The Philips Colour Observation Camera stands out as a cutting-edge solution in the realm of medical imaging and diagnostics. Designed to meet the rigorous needs of healthcare professionals, this camera combines advanced technology with intuitive usability to enhance the quality of patient care.

One of the main features of the Philips Colour Observation Camera is its high-resolution imaging capabilities. With superior color reproduction and exceptional clarity, the camera allows for precise visualization of anatomical structures. This high level of detail is critical for procedures where accurate diagnosis and intervention rely on visual assessment.

The camera is equipped with advanced imaging technologies, including a sophisticated sensor that captures images in a wide spectrum of colors. This means healthcare providers can observe subtle variations in tissue coloration, which can be indicative of underlying health conditions. With such capabilities, the Philips camera plays a vital role in various applications ranging from endoscopy to surgery, aiding in real-time decision-making.

In addition to its imaging prowess, the Philips Colour Observation Camera comes with user-friendly interfaces. Its ergonomic design ensures that it can be easily operated by medical staff without extensive training. The intuitive controls allow for quick adjustments of focus, zoom, and lighting, facilitating efficient workflows in busy clinical environments.

Another important characteristic of this camera is its versatility. It can be seamlessly integrated into existing medical systems, including operating room setups and diagnostic laboratories. This integration allows for streamlined workflows and enhances collaboration among multidisciplinary teams.

In terms of durability, the camera is built to withstand the challenges of a clinical setting. With robust construction and high-quality materials, it ensures longevity and reliable performance even in high-pressure situations.

The Philips Colour Observation Camera also incorporates advanced digital connectivity options. It supports wireless and wired connections, enabling easy transfer of images and video for documentation, remote consultations, or further analysis. This connectivity enhances collaboration among healthcare professionals and contributes to improved patient outcomes.

Overall, the Philips Colour Observation Camera represents a significant advancement in medical imaging technology. Its combination of high-resolution imaging, user-friendly design, and integration capabilities makes it an essential tool for modern healthcare. As the demand for precision in medical diagnostics continues to grow, devices like the Philips Colour Observation Camera will undoubtedly play a crucial role in meeting those needs.