ENInstallation, Installing the WebCam software

ENInstallation

Installing the WebCam software

The software supplied only works on PC’s / laptop’s with the operating systems Microsoft® Windows® 98SE, ME, 2000 and XP.

Notes!

–Unplug all your USB devices (except USB keyboard and USB mouse) before you start.

–Do not plug in your USB WebCam yet. Run the Installation CD- ROM first.

–Have your Windows® CD-ROM at hand.

–The SPC900NC WebCam is 'XP Plug & Play'. This means if you are running Windows XP and you have installed Service Pack 2 and the latest Microsoft Windows XP updates you don't need to install the SPC900NC WebCam driver. Simply plug in the WebCam and you can start using your SPC900NC WebCam.

1Place the installation CD-ROM in your PC’s / laptop’s

CD-ROM / DVD drive.

> After a couple of seconds the the ‘Language selection’ screen appears automatically.

Note!

If the 'Language selection' screen does not appear automatically, open the Microsoft® Windows® Explorer and double click on the 'Set-up.exe' icon in the CD-ROM directory.

2Select your language and click on the 'OK' button. > The following screen appears.

3Select at least the ‘SPC900NC WebCam Driver’ and ‘Philips VLounge Advanced’.

Click on the 'Next' button.