ENInstallation
Putting the camera into operation mode
1Bend the camera neck into the desired position.
2Switch on the camera ( 
) by sliding the lens cover
(light switch) one click downwards ( 
).
> The camera is now in operation mode but will only function when the applications are started up.
See chapter ‘Using the applications’.
1x click
• If desired you can switch on the front light / keyboard light ( 
) by sliding the light switch (lens cover) one more click downwards ( 
).
To switch off the front light / keyboard light ( 
), slide the light switch (lens cover) one click upward.
2x click
Notes!
–When using the camera be sure to slide the lens cover (light switch) at least one click downwards ( 
).
–When the camera is not in use, be sure to slide the lens cover (light switch) all the way up (two clicks) to protect the lens.
10