Using the 3D Video Processor, PlayStation 3 Games

Using the 3D Video Processor

Once you have connected your devices together with HDMI cables, as shown in the diagram, you are ready to begin. Power ON your 3D video source, 3D Video Processor and your 3D projector.(*)

Note *: The 3D video source device must be powered on before the 3D Video Processor.

PlayStation® 3 Games

1.Make sure that you have updated your console to the latest software version in PlayStation® 3.

2.Go to the "Settings menu → Display settings → Video output → HDMI".

3D Blu-rayTMPlayer

1.Make sure that your player can support 3D Blu-rayTMdisc and that 3D output is enabled.

2.Insert the 3D Blu-rayTMdisc into the player, press "Play".

3D TV (e.g. SKY 3D)

1.Contact your TV service provider to enable any 3D channels on your channel package.

2.Once enabled, switch to the 3D channel. - You should see two images side-by- side.

3.Press the "SBS Mode" button on the front of the 3D Video Processor.(*)

Note *: If input video is normal 2D, please press SBS mode to "Off".

3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal output

1.Connect your 3D device and switch to out 3D content with 2D side-by-side output to 3D Video Processor. You should see two images side-by-side.

2.Press the "SBS Mode" button on the front of the 3D Video Processor.

3.When you see "3D" in the top right hand corner of the screen, enable your projector's 3D mode, turn on your 3D glasses and put them on.

4.If necessary, use your projector's 3D Sync-Invert option to optimize your 3D experience. The option is located in the "Display" section of the projector OSD

menu.

Note: If input video is normal 2D, please press SBS mode to "Off". If SBS mode is active, 2D video content will not display correctly.