Sanyo VPC-X1200EX, VPC-X1200GX White balance, Select the desired icon, and press the SET button

Page 17

RECORDING SETTINGS

White balance

This camera automatically adjusts the white balance under most lighting conditions. However, if you want to specify the lighting conditions or change the overall tone of the image, the white balance can be manually set.

1 Display the Recording Menu (page 3).

2 Select “WHITE BALANCE” and press the SET button.

hThe white balance menu appears.

>: The camera will make the white balance adjustment automatically based on the natural and artificial light conditions. This is the setting used in the auto mode.

r: For shooting outside on a sunny day.

o: For shooting outside on a cloudy day.

p: For shooting inside under fluorescent lighting.

q: For shooting inside under incandescent lighting.

^: For more accurate adjustment or when the light source cannot be specified (one-push).

Select the ^icon from the white balance menu, fill the entire screen with a plain white paper, and press the SET button to set the white balance. To use any of the other white balance settings, proceed to step 3.

3 Select the desired icon, and press the SET button.

hThis completes the white balance setting.

HINT

To cancel the white balance setting

i Perform steps 1 and 2, select >, and then press the SET button.

15English

Image 17

Contents Important note VPC-X1200EX VPC-X1200 VPC-X1200GXRefer to the page indicated for detailed information HOW to Read this ManualPoints that require special attention Contents „ Appendices How to display the menus Accessing the MenusExit the menu Press the Menu buttonHow to operate the menus Overview of the Menus Recording Menu Accessing the MenusLight-measuring mode menu Focus mode menuMode ISO sensitivity menuSlideshow Protect Rotate Playback MenuSlideshow Print instructions page 22 h Specify the print settingsProtect Contrast correct page 20 h Add contrast light and dark toBrightness Language Option MenuClock set Auto power offStartup display SoundRecord an audio file Recording SettingsRecording and playing back audio files Display the desired audio data Playing back audio recordingsPlay back the recording Do thisFocus area setting Recording SettingsISO sensitivity Did the resolution change to F?Select the desired icon, and press the SET button To cancel the white balance settingWhite balance About the capture date and date imprinting Date imprintIs the sequential shots speed slow? If the imprinted date is shown as - - .- .- …Image protect Playback SettingsResize Why can’t the image be resized?Rotating images Blur correction Playback SettingsAbout the blur correction icon If the Blur correction not successful message appearsContrast correction If the Red-eye correction not successful message appears Red-eye correctionDistortion correction Print orders Dpof Display the screen to set the print settingsAbout the finished prints Printing a single frame from a video clipAbout the Dpof format Specifying date imprinting and number of prints Specifying dated prints Specifying the number of printsSelect YES, and press the SET button Clearing all the print settingsSlideshow playback Display the desired image Press and hold the Menu Displaying image properties Information ScreenButton for at least 2816×2112 Second Audio file playbackFile No. setting Option SettingsFile number function OFF File name image number File number function on File name image numberWhat about the internal memory? Reformatting erases the data Option SettingsInitializing the card memory and internal memory Resetting the camera settings To check the remaining video clip recording time Checking the remaining internal memory and card memoryStill Image Shooting Screen Video Clip Recording ScreenSet the camera to the audio Recording modeFor audio data Press the ON/OFF button to turn Camera on Battery packBattery remaining charge English Switch input to Connecting to a TVPlayback Insert and pull out the cable carefullyPrint preparations Direct PrintingSelect PRINTER, and press the SET button Direct PrintingTo select one image and print it print selected image Complete the printing setup Press the l or m buttonTo cancel printing Select Print ALL IMAGES, and press the SET button Complete the printing setup Press the Menu buttonTo print all the images all images Button Select DPOF, and press the SETSelect the printer settings tab Screen to set the selected parameter appears Question Answer Action PowerCommonly Asked Questions Shooting Commonly Asked QuestionsMonitor Images Misc Commonly Asked Questions Camera TroubleshootingProblem Cause Action Troubleshooting Flash is not Obstructed ISO Set the ISO Sensitivity Sensitivity to Image Macro +focus range setting is not available