Sakar 52379 owner manual Preparing Your Camera for Use, Battery Installation

Page 5

Preparing Your Camera for Use

Battery Installation

Your camera requires two AAA alkaline batteries, which must be inserted as follows:

1.Slide the battery compartment open on the side of the camera in the direction indicated by the arrow.

2.Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover.

3.Close the battery compartment.

The LCD will flash if your batteries are running low in which case you will need to replace the camera’s batteries before taking photos. When the battery voltage drops below 2.2V, the LCD will display “Lo” and then automatically switch off.

Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid leakage and corrosion.

Warning:

Please download any photos you have on the camera before opening the battery compartment.

Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera.

-5 -

Image 5
Contents Digital Camera Introduction Table of ContentsComputer System Requirements What your camera includesQuick Look at Your Camera Preparing Your Camera for Use Battery InstallationTaking Photos Starting Your CameraCamera Modes Photo Resolution HI/Lo and Compression Hd/LdShot Mode CS Resolution CompressionContinuous Shot Mode d8 video Delete All CA Self-Timer StDelete Last Photo CL Frequency 50/60 Power OffEnergy save mode Software & Camera Driver Installation Installing Kids Cam Sticker Factory SoftwarePage Page Page Downloading Photos Page Get photos from camera window will appear About Kids Cam Sticker FactorySelect any two Workshop projects for Free How to purchase additional Workshop projects Capturing AVI video using WebCam ExpressPage Technical Support Camera MaintenanceAppendix B Troubleshooting Appendix a Technical Specifications