Sakar 93045 owner manual Preparing Your Camera for Use, Battery Installation

Page 5

Preparing Your Camera for Use

Battery Installation

Your camera requires two AAA alkaline batteries, which must be inserted as follows:

1.Open the battery compartment on the bottom of the camera.

2.Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover.

3.Close the battery compartment.

The LCD will flash if your batteries are running low in which case you will need to replace the camera’s batteries before taking photos. When the battery voltage drops below 2.2V, the LCD will display “Lo” and then automatically switch off.

Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid leakage and corrosion.

Warning:

Please download any photos you have on the camera before opening the battery compartment.

Opening the battery compartment and/or removing the batteries will erase the photos currently stored in the camera.

Download your photos as often as possible. Photos may be lost when the batteries run low.

-5 -

Image 5 Sakar 93045 owner manual Preparing Your Camera for Use, Battery Installation
Contents Digital Camera Introduction Table of ContentsComputer System Requirements What your camera includesQuick Look at Your Camera Preparing Your Camera for Use Battery InstallationTaking Photos Starting Your CameraSelf-Timer St Power OffContinuous Shot Mode d8 video Camera ModesDelete Last Photo CL Shot Mode CSDelete All CA Photo Resolution Hi/Lo and Compression Hd/Ld Frequency 50/60 ResolutionEnergy save mode Installing Spider-Man Photo Lab Software Page Page Page Downloading Photos Page Get photos from camera window will appear Select any two Workshop projects for Free About Spider-Man Photo LabHow to purchase additional Workshop projects Capturing AVI video using WebCam ExpressPage Page Technical Support Camera MaintenanceWhat To Do When Service Is Required Sakar Warranty CardWhat Is Not Covered By Warranty Appendix a Technical Specifications