Sakar 24280, 24282 owner manual Section Two Lithium Battery

Page 3

Section Two - Lithium Battery

Before using your camera for the first time, charge your camera’s battery. Once the battery is charged, move the Camera/Charger selector to “Camera” mode. Do not move the selector back to “Charge” mode until you have downloaded all your photos to your computer and are ready to recharge the camera. Switching to Charge mode will erase all the photos on your camera.

To recharge your camera’s battery, connect the camera to your computer with the USB cable and move the Camera/Charger selector to “Charge” mode. When the batteries are recharging, the LED will be red. Once the batteries are fully charged, the LED will turn green (after less than 3hours). The camera will function normally while charging. We recommend charging your camera’s battery every 7 days or when you have used up the full memory capacity of the camera.

NOTE: The camera batteries must be recharged for at least four hours on the first use.

In order to conserve battery power, if the camera is not used for 30 seconds, the camera will automatically enter energy save mode.

- 2 -

Image 3
Contents 24280/24282 Digital Getting to Know your Digital Camera Package ContentsSection One Profile Overview System RequirementsSection Two Lithium Battery Page Page Page Page Page Section Four Taking Photos Turn Camera Off Auto-Shoot ModeContinuous Shoot Mode Continuous Shoot Mode 3 shotsDisplay Photo ResolutionPhoto Compression Ratio Photo StorageFluorescent Lamp Frequency Section Six Downloading Photos Page Greeting Cards and Postcards How to purchase additional Workshop projects Section Eight Capturing AVI Video Conferencing Page Page Appendix 2 Troubleshooting