Starting Your Camera
Press the mode button to start the camera. The camera will sound a beep to confirm that your camera is on and ready for use.
Taking Photos
Compose your shot using the view finder.
Hold the camera steady and press the shutter button to take photo. The camera will beep when a photo is taken. The number of photos taken is displayed on the LCD screen.
If you attempt to take a photo when the memory is full the camera will beep continuously.
The Camera Modes
Photo Resolution 
There are 2 photo resolutions to select from, Hr (VGA = 300k resolution) or Lr (CIF =100k resolution)
1.Press the mode button to select "Hr" or "Lr" shown on the LCD display.
2.If the LCD displays “Hr” this means that the present resolution is “Lr” and in order to change to “Hr”, click on the shutter button within 5 seconds.
3.If the LCD displays “Lr” this means that the present resolution is “Hr” and in order to change to “Lr”, click on the shutter button within 5 seconds.
4.All photos taken after changing resolution will be at the new resolution.
The photo resolution settings determine the number the number of photos and the amount of memory
- 6 -