Sanyo UR18650E, UR18650A, UR18650U manual Product waste from residues, Contaminated packaging

Page 5
Product (waste from residues)

Product name: Lithium Ion Battery Cell

Reference number: SDS-IBT-00010

 

Establishment / Revision: Dec.1 2008

13. DISPOSAL CONSIDERATIONS

!Recommended methods for safe and environmentally preferred disposal:

Product (waste from residues)

Do not throw out a used battery cell. Recycle it through the recycling company.

Contaminated packaging

Neither a container nor packing is contaminated during normal use. When internal materials leaked from a battery cell contaminates, dispose as industrial wastes subject to special control.

14. TRANSPORT INFORMATION

In the case of transportation, avoid exposure to high temperature and prevent the formation of any condensation. Take in a cargo of them without falling, dropping and breakage. Prevent collapse of cargo piles and wet by rain. The container must be handled carefully. Do not give shocks that result in a mark of hitting on a cell. Please refer to Section 7-HANDLING AND STORAGE also.

!UN classification: However this product's shipping name is "Lithium ion batteries" (or "Lithium ion Batteries packed with equipment" or "Lithium ion Batteries contained in equipment"), it is not recognized as "DANGEROUS GOODS" when its transport condition accords with “packing instruction 965 part 1 of IATA- DGR" (or "packing instruction 966 part 1" or "packing instruction 967 part 1") or "special provision 188 of IMO-IMDG Code".

15. REGULATORY INFORMATION !Regulations specifically applicable to the product:

IATA-DGR (air transportation) IMO-IMDG Code (sea transportation)

US Department of Transportation 49 Code of Federal Regulations [USA] Wastes Disposal and Public Cleaning Law [Japan]

Law for Promotion of Effective Utilization of resources [Japan]

16. OTHER INFORMATION

!The information contained in this Safety data sheet is based on the present state of knowledge and current legislation.

!This safety data sheet provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications.

!Reference

Chemical substances information: Japan Advanced Information center of Safety and Health

International Chemical Safety Cards (ICSCs): International Occupational Safety and Health Information Centre (CIS)

2002 TLVs and BEIs: American Conference of Governmental Industrial Hygienists (ACGIH)

Dangerous Goods Regulations - 50th Edition Effective 1 January 2009: International Air Transport Association (IATA)

IMDG Code - 2008 Edition: International Maritime Organization (IMO) RTECS (CD-ROM)

MSDS of raw materials prepared by the manufactures

First edition:

Dec. 01 2003

Prepared and approved by

Sanyo Electric Co., Ltd.

Mobile Energy Company

Battery System Development Management Department

Image 5
Contents Safety data sheet for chemical products SDS Spilled internal cell materials A battery cell and spilled internal cell materials !Ingestion8. EXPOSURE CONTROLS / PERSONAL PROTECTION !Engineering measures Aluminum Lithium metal oxidate -LiMn-Co-NiO2Graphite CopperContaminated packaging Product waste from residues