Sanyo VCC-WD8874 manual Specifications PAL

Specifications (PAL)

Model.No			VCC-W8775P		VCC-WD8875P
Scanning system			PAL standard 625 lines
Image sensor			Progressive scan 1/3" CMOS
			800(H) x 600(V) effective picture elements
Image size			1/3“ (4.5mm x 3.38mm)
Synchronizing system			Internal / Line lock synchronization
Day and Night			—		True D/N
Resolution			Horizontal: 550 TV lines (typical)
Video output level			1.0Vp-p (75 ohms, composite)
Video S/N ratio			More than 50dB (AGC off)
Minimum	Color	50 IRE	0.8 Ix (at F1.2)
illumination		20 IRE	0.32 Ix (at F1.2)
	B/W	50 IRE	—		0.08 Ix (at F1.2)
		20 IRE	—		0.032 Ix (at F1.2)
Wide Dynamic			ON/OFF, adjusting level etc. 65dB*(typical)
Backlight compensation				ON / OFF
White balance			ATW / MANUAL
Light control			Optical auto iris lens / Electronic iris
Electronic iris				ON / OFF
Electronic shutter			1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,1/4000, 1/10000
Lens iris level				Level: L to H
Auto iris output				DC type
Aperture correction			High / Normal / Low / Off
AGC gain			High / Normal / Off
Digital noise reduction				ON / OFF
Menu			OSD, title setting: 16 characters
Lens mount				CS mount
Camera mount			1/4“–20 UNC (top or bottom selectable)
Environmental conditions			Operating —	Temperature: -10˚C to +50˚C
				Humidity: within 90% RH
			Storage —— Temperature: -20˚C to +70˚C
				Humidity: within 70% RH
Power requirement			24V AC, 50Hz / 12 to 15V DC

Dimensions

VCC-W8775P

129.3 (5.09)

120.5 (4.74)

119.5 (4.70)

11.2 (0.44)

VCC-WD8875P

129.3 (5.09)

120.5 (4.74)

119.5 (4.70)

11.2 (0.44)

	Unit: mm (inch)
	71.0 (2.80)
①	POWER VIDEO OUT	(1.77)
AC24V– DC12V–
+ ~
– ~		45.0
③ GND	CLASS 2 WIRING
Rear panel ②

①Power indicator (POWER)

② Video output connector

③ Power connection terminals

(24V AC,12V DC,GND)

Unit: mm (inch)

		71.0 (2.80)
①		ALARM OUT
		POWER VIDEO OUT ALARM IN	(1.77)
DC12V–	AC24V–	COM
+ ~
– ~			45.0
③ GND		CLASS 2 WIRING
Rear panel ② ④

①Power indicator (POWER)

② Video output connector

③ Power connection terminals

(24V AC,12V DC,GND)

④Control terminals

Power consumption	6.9w			T.B.D.
Dimensions	71.0	(W) x 45.0	(H) x 119.5 (D) mm
	2.80	(W) x 1.77	(H) x 4.70 (D) inch
Weight	320g (11.29oz)			330g (11.64oz)
		*JETA Measurement Method
		NOTE: Specifications subject to change without notice.

*iridix technology is provided by Apical Limited, UK.

Caution: Please consult the instruction manual to ensure safe and proper operation of the product.

Digital System Company of SANYO Electric Co., Ltd. obtained

Quality Management System ISO9001 and Environmental

Management System ISO14001 certifications .

Distributed by:

SANYO Electric Co., Ltd.

Digital System Company

http://www.sanyosecurity.com

©2008 SANYO Printed in Japan 2008.9.NP

SFA192F