Philips SDR-S50 To disconnect USB cable, Safely, Charging the battery using USB bus power

Page 93

∫ To disconnect USB cable

3

SDR-S50

safely

 

 

Verify [MATSHITA SDR-S50/SD USB

 

 

Device] is selected and click [OK].

1 Double click the

icon in task tray

 

 

SDR-H85

displayed on the PC.

 

 

Verify [MATSHITA SDR-H85/SD USB

≥ Depending on your PC’s settings, this

 

Device] or [MATSHITA SDR-H85/HDD

icon may not be displayed.

 

 

USB Device] is selected and click

2 Select [USB Mass Storage Device]

 

[OK].

and click [Stop].

 

 

 

Charging the battery using USB bus power

When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge.

≥Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the way.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.

≥During charging, the status indicator flashes. When charging is finished, the status indicator turns off.

≥Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (l 14)

≥Charging will take 2-3 times longer than charging with the AC adaptor.

≥Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).

≥If the status indicator flashes at a particularly fast or slow rate, refer to page 110.

93

VQT2L35

Page 92 Page 94
Image 93
Page 92 Page 94
Contents Operating Instructions Use only the recommended accessories Information for Your SafetyFor the purposes of these operating instructions Indemnity about recorded contentHandling of HDD SDR-H85 Do not expose the HDD to vibrations and shocksCards that you can use with this unit Carefully observe copyright laws≥ Sdxc Logo is a trademark of SD-3C, LLC LicensesContents Playback BackupWith a PC OthersAccessories Optional accessoriesCD-ROM Handling Parts identification16 AF/AE button AF/AE l Joystick 2021Grip belt Adjust the belt length and the pad position Flip the belt Adjust the length Replace the beltBattery release lever Battery l Tripod receptacle Power supply SetupAbout batteries that you can use with this unit Inserting the battery ≥ Press the power button to turn off the power. lInsert the battery until it clicks and locks Connect the AC adaptor to this unit’s DC input terminal Charging the batteryConnecting to the AC outlet Charging and recording time ≥ Temperature 25 oC/humidity 60%20 min 50 minBattery capacity indication ≥ The display changes as the battery capacity reduces≥ These times are approximations Cards that you can use with this unit Recording to a cardSdhc SdxcVQT2L35 Check that the access lamp has gone off Access lamp Access aInserting/removing an SD card Securely close the SD card coverTurning the power on and off with the LCD monitor Turning the power on and off with the power buttonTo turn on the power To turn off the power Turning the unit on/offOperate the mode switch to change the mode to or Selecting a modeChange the mode to recording or playback Recording mode l 36 Playback mode l 59Move the joystick left Using the menu screenLanguage selection Recording modeMenu list These menus are only forOFF Power saving function is not activatedOFF MinutesBeeps for 4 times Power LCD LCD SET TV Aspect Initial SETCOPY*1*3 Playback modeDoes not appear Appears These menus are only forSetup # Clock SET Setting date and timeSetup # DATE/TIME # OFF/D/T/ Date Select the menu. lSelect Home and press the joystick Setup # SET World TimeSelect Destination and press the joystick Current time Time difference from GMT Greenwich Mean TimeLCD monitor adjustment Adjusting LCD monitorAdjusting the brightness Colour level of the LCD monitor Make adjustmentsRotate the LCD monitor towards the lens side Recording YourselfBasic camera positioning Before recordingBasic motion picture recording Recording BasicIntelligent auto/Manual button iA/MANUAL Intelligent auto modeAbout Intelligent auto mode Automatic white balanceAuto focus Close the LCD monitor while the mode is set to Quick power onQuick start Open the LCD monitorRecording motion Screen indications in the motion picture recording modePictures Press the recording start/stop button to start recordingMedia Select Selecting a media to record SDR-H85Normal recording mode Recording in long recording modeLong recording mode Press and hold the Long REC. button50 min 40 min 20 min Recording modes/approximate recordable timeSD card HDDLong recording mode Recording mode ≥ Recordable time using the battery lFavors image quality B Favors recording time Message is displayed when this unit is moved rapidly Record Setup # Shooting Guide # onShooting guide About the screen indications in still picture recording Recording Basic 3 Recording still picturesNumber of recordable pictures Picture sizeRecording Basic 4 Recording functions Record Setup # D.ZOOM # desired settingEnhanced optical zoom Digital zoom function Zoom leverActive mode Image stabilizer functionOptical image stabilizer button Press the AF/AE button Start recordingAbout target frame Recording functions Operation iconsOperation icons Web mode Help modeBacklight CompensationGuide line Soft skin modeIntelligent contrast ControlWeb mode Help modeSoft skin mode PRE-RECMenus Record Setup # Auto Slow Shtr # on Record Setup # Wind Noise Canceller # onPrimary Record Setup # WB Adjust Record Setup # Zoom MIC # onWind Noise Canceller Scene ModeSelf Timer Auto Slow ShtrFunctions Manual recordingSelect With the joystick Select the white balance mode White balanceTo set the white balance manually Open Manual shutter speed/iris adjustmentRecording with manual focus Record Setup # MF Assist #Motion picture playback Change the mode toSelect the scene to be played back, then press the joystick PlaybackSelect the playback operation with the joystick To play back scenes recorded in long recording mode lChange the thumbnail display Select Change VideoFast forward/rewind playback Speaker volume adjustmentSlow-motion playback Frame-by-frame playbackTime frame index Creating still picture from motion picture≥ Quality will be different from the normal still picture ≥ Next previous scene can be displayed by selectingSelect the date select icon and press the joystick Playing back motion pictures by dateSelect the playback date, then press the joystick Date select iconVideo Setup # Resume Play # Video Setup # Repeat Play #Repeat playback Resuming the previous playbackStill picture playback Playing back still pictures By dateStill picture compatibility Select START, then press the centre of the joystick Date SetupSlides Interval ShortTo delete by confirming images being played back Deleting scenes/stillSelect Delete and press the joystick or press the button EditingProtecting scenes/still pictures Video Setup or Photo SETUP#Press the Menu button while deleting Scene ProtectPartially delete Dividing a scene toSelect the scene to be divided, then press the joystick Select with the joystickWhat is DPOF? Dpof settingPhoto Setup # Dpof SET # Dpof SET # Cancel ALLSetup # Media Status Setup # Card StatusHDD Confirming remaining capacity on the copy destinationCopying SDR-H85 Copy≥ The thumbnail view of the copy destination is indicated Setup # Format Media Setup # Format CardFormatting Select SD Card or HDD and press the joystickOn your TV Watching Video/PicturesWith a TV AV cable supplied ≥ Insert the plugs as far as they will goTo display the on-screen information on the TV Setup # EXT. Display # onTo copy to/play back a disc Preparing for copying/playing backDVD-RAM DVD-RW/+RW DVD-R/DVD-R DL Insert the disc in the DVD burner Burn DiscPlay Disc ≥ Eject the disc after copying is completed Copying to discsApproximate time for copying to a disc Important Notice≥ When playing back on a TV, connect this unit to the TV. l Playing back the copied discMini AB USB Connection Cable supplied with DVD burner Formatting discs Managing the copied discAuto protect Displaying disc informationWhen using a USB terminal Using SD card slot or USB Terminal of other video devicesDubbing images onto Other video deviceVideoCam Suite Smart wizard What you can do with aVQT2L35 Before opening the CD-ROM package, please read the following End User License AgreementOperating environment for VideoCam Suite Operating environmentCPU RAMSpace Free hard diskSound InterfaceMHz or higher Higher processorWindows 71 GB or higher Windows Vista Home Basic 512 MB or higherInstallation Insert the CD-ROM into the PCFor Windows Vista Uninstalling VideoCam Suite PC must be rebooted for the application to work≥ After uninstalling the software, be sure to reboot the PC Connect this unit to the AC adaptor Connecting to a PCTurn on the unit Connect this unit to a PCCharging the battery using USB bus power To disconnect USB cableSafely Copying your still pictures to your PC About the PC displayExample folder structure of an SD card Example folder structure of HDDStarting VideoCam Suite Using with a PCUpload to YouTube ≥ This service is available as of 1 DecemberConnect this unit to a PC. l Select YouTubeOperating environment OPEN/F2.2 Recording indicationsPlayback indications Confirmatory indications when a DVD burner is connectedIndication of connection to other devices Confirmatory indications100 101 About recovery102 Used simultaneouslyTroubleshooting Remaining battery indication is not displayed properly103 104 105 106 107 About this unitCleaning When carrying the unit, do not drop or bump itWhen you are not going to use the unit for an extended time When disposing of or giving away this unit, note thatAbout the battery About the AC adaptor109 110 About SD cards About charging errorsAbout condensation LCD monitorCauses of condensation 111112 SpecificationsUSB 113114 Specifications may change without prior notice 11580 GB Compression Panasonic Corporation
Top Page Image Contents