Charge the built-in battery

Select a special effect

1 In viewfinder mode, tapto show the system setting menu.

2 Tap [Effects] to enter scene setting.

3 Tap/to select a special effect you like. 4 Tap [OK] to confirm the setting.

Note

•• The USB connector of the camcorder is primarily intended for charging and mass storage purposes.

•• You can also connect the USB connector of the camcorder to another device (for example, a TV, DVD/Blu-ray player or Home cinema set) for media play. In this case, make sure that the device supports the H.264 file format.

•• Not all devices that support H.264 file format can play media files in the camcorder through direct USB connection.

•• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

1 Press at the bottom of the camcorder to eject the USB connector.

PRESS

2 Connect the USB connector to a USB socket on a PC.

»» The status indicator on the shutter button starts flashing in orange.

3 Wait until the status indicator stops flashing and turns to green steadily. »» The built-in battery is fully charged.

Tip

•• The camcorder is fully charged for first-time use.

•• It takes about 3.5 hours to fully charge the built-in battery via the PC.

You can also charge the camcorder via a USB adaptor (not supplied) connected to mains power.The charge time is about 2 hours.

EUR

EN 9