RCA Pro842, Pro848, Pro847 Using Optional Alkaline AA Batteries, Install the Alkaline Batteries

Page 13

Powering Your Camcorder

Using Optional Alkaline “AA” Batteries

You can power the camcorder with six alkaline dry-cell “AA” batteries.

Install the Alkaline Batteries

1.Press the PUSH button to open the battery compartment. Carefully open the compartment fully.

2.Insert six alkaline batteries into the compartment matching the polarities (+ and –) on the batteries to the battery compartment as shown.

3.Close the battery compartment. Press the PUSH button to lock the battery compartment shut.

Notes: The camcorder may not operate properly in cold temperatures below 50ºF (10º C).

The camcorder and battery level indicator may not operate properly when the batteries need to be replaced.

Remove the batteries if you will not be using the camcorder for a long period of time to extend the useful life of the batteries.

Safety Precautions When Using Alkaline Batteries

Do not short, disassemble, heat, or throw the batteries into a fire. Do not recharge the batteries or short the battery terminals.

Do not short the battery terminals for the nickel cadmium battery.

Batteries become warm during and after use. Use caution when removing them. Use “AA” alkaline batteries only during their recommended lifetime.

Remove at least one battery if you will not be using the camcorder for a long period of time to extend the useful life of the batteries.

Do not use manganese batteries to power the camcorder.

To reduce the risk of battery leakage or an explosion:

•Make sure battery is inserted with correct polarity.

•Remove the batteries from the camcorder before storing it.

•Do not use old and new batteries at the same time.

•If the batteries leak, remove the batteries and carefully wipe up the fluid.

•Keep the terminals clean. Use a dry cloth to wipe any dirt off the terminals.

11

Image 13

Contents USER‘S Guide Product Registration Important Safety InformationAssistance Table of ContentsFirst-Time Operation Unpack the camcorder and accessoriesAttach shoulder strap Attach lens cap cord and adjust handstrapInstall Six Optional AA Alkaline Batteries Supply power to the camcorderAttach the AC Adapter Turn on the camcorder Adjust viewfinder focusStart and stop recording Insert a cassetteAUDIO, VIDEO, RF Review the camcorder’s controlsUsing the AC Adapter to Power Your Camcorder Powering Your CamcorderUsing Optional AC Plug Adapter Remove the AC AdapterBattery Safety Precautions Using the Rechargeable Battery to Power Your CamcorderInstall the Battery Remove the BatteryCharge the Battery Nickel Cadmium Battery Care and Storage Battery Level IndicatorInstall the Alkaline Batteries Using Optional Alkaline AA BatteriesSafety Precautions When Using Alkaline Batteries Charging and Refreshing Rechargeable Battery Using the Optional AC Adapter/ChargerRefresh the Battery Attach Adapter/Charger Power the CamcorderRemove the Adapter/Charger Replace cell holder in remote until it clicks into place Lithium Cell InstallationStoring the Remote Control Remote ControlStore the Remote Control Remove the Remote ControlZoom T and W Buttons During record or record pause Counter Memory and Reset ButtonsStop Button REC Record Button REW Rewind ButtonPlay Button FWD Fast Forward ButtonRecording Erase Protection Safety TabVideo Cassettes Inserting or Removing CassettesUse the zoom feature To Make a Recording Attach a power supplyMaking a Recording Insert a video tapeViewfinder Displays Zoom IndicatorStatus Displays Battery Level Indicator AE Auto Exposure Higher Shutter Speed IndicatorElapsed Time-Counter Auto DATE, Date, Date and Time, orViewfinder Adjust Viewfinder for Convenient ViewingEyepiece Focus Control Microphone Flying Erase HeadModel Pro848 Only External Microphone Jack Automatic White Balance and IrisCamera Edit Feature Quick Review Feature Blank SearchZooming Using the Zoom ControlAE Automatic Exposure Shutter Speed Control Using Focus Lock FocusingConditions Requiring Focus Lock Install Cell Install the Clock Lithium CellRemove Cell Correct the Date or Time Set the Date and TimeSelect the Display to Record Recording Date or Date and Time on Your TapeTime Counter To Use the Memory-Stop FeatureTraveling Tips Recording TipsModel Pro848 Only Recording from a TV or VCR IN/OUT SwitchOperation ConnectionPlayback Viewfinder Playback and FeaturesViewfinder Playback Visual Searching Playback FeaturesTape Positioning Stop-Action PauseModel Pro848 Only Playback on TV or VCR with InstallationViewing What the Camcorder is Seeing or Recording Playback Operation and How to Copy Tapes on the VCRModels Pro842 and Pro847 Only Playback on TV or VCR with Playback Playback on a TV Without Audio/Video Inputs InstallationModel Pro848 Only Make sure Normal TV Viewing Playback OperationTo order accessories, contact your local Dealer Optional AccessoriesDCC100 DC Cable CPS801C AC Adapter/Charger CRF800 RF Output AdapterVH54 Cable Transformer AH25 Y-AdapterUsing the Optional AC088 Tripod Please complete other side also Accessory Order FormOrder Form for Camcorder Models Pro842/Pro847/Pro848 Authorized Signature 800 338 To order accessories, contact your local DealerUnited States and Canada Orders Cleaning the Camcorder Care and MaintenanceCleaning the Camcorder’s Lens Cleaning the Camcorder’s ViewfinderThings to Avoid Proper Care and StorageTrouble Checks Trouble Checks and AdjustmentsSee Recording. See Returning equipment to Thomson for repair or exchange Customer Assistance and ServiceLimited Warranty How State Law relates to warranty What your warranty does not coverProduct Registration If you purchased your Camcorder outside the United StatesCamcorder SpecificationsAC Adapter Information to User CAM/VCRPLAY Button IndexOn next Play VCRPLAY/CAM Button Consumers Customer Service AccessoriesCanadian Consumers Meridian Street Indianapolis,