RCA F36715, F32715 manual Advanced Connections, Back of the TV

SETUP AND CONNECTIONS

ADVANCED CONNECTIONS

Advanced connections give you better sound and video by separating the audio and video signals and enable you to connect multiple components.

This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.

Once you have made your connections you will want to program the TV to tune to the correct Video INPUT channel in order to see and hear audio and video from the component. You will program this later in the Interactive Setup.

Back of the TV

The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).

Input 2 (VIDEO or Y PB PR)

Connect any of the following components to INPUT 2:

• VCR	• Internet Access Device
• Laserdisc Player	• DVD Player

•Satellite Receiver

	Input 1	The Y, PB, PR jacks are used in place of the VIDEO jack to connect
Connect any of the following components:		an optional component video source, such as a DVD player. Unlike
		a single video input, the Y, PB, PR jacks maintain the video signal as
• VCR	• Internet Access Device	three separate signals through these three jacks. To ensure
• Laserdisc Player	• DVD Player	maximum picture quality, use three video-grade cables for the Y,
• Satellite Receiver		PB, and PR connections.
To view the component connected to Input 1:		To View the component connected to Input 2:
Use the WHO•INPUT button on the remote.		Use the WHO•INPUT button on the remote.

			External Speaker Jacks
			Use to connect external
S-Video			speakers for surround
R	L	G-LINK	sound. Make sure the
This optional			Speaker Selection is set
connection can be	PRPBY
			to EXTERNAL.
used for better
video quality
picture.			G-LINK
			Connect the G-LINK
			cable for one-
Audio Outputs		Cable/Antenna	button recording
			and channel tuning
Connect to an audio receiver	Takes the signal input from a cable,		from the Guide.
or amplifier for variable	cable box, or an off-air antenna. Can
controlled or fixed level	also be used for basic component
stereo output.	connections.

6