Setup
Before you can use the camcorder, you must set up the viewfinder.
1.Rotate the viewfinder support until it stops, as shown.
Caution: The viewfinder support rotates only 90°. Do not force it past this point.
2.Rotate the eyepiece about 180° until it stops, as shown.
Caution: The eyepiece rotates only about 225°. Do not force it past this point.
Adjustment
Once you set up the viewfinder, you can adjust the position of the viewfinder support and angle of the eyepiece, so you can see through the eyepiece easily.
1.Slide POWER to CAMERA or VCR.
2.To adjust the viewfinder support, slide it to the left or right until the eyepiece is directly in front of your right eye.
3.To adjust the eyepiece, rotate it up or down until you can see through it.
4.Turn the focus control on the right side of the eyepiece until the image is clear and sharp.
Focus Control 
15