Elinchrom 400, FX 100 manual Cordless flash control EL-Skyport Universal Set, Sychronisation socket

Page 11

Cordless flash control

EL-Skyport triggers flashes without sync cords over a distance of approximately 100 m. Further detailed information please find under www.elinchrom.com / Products / RX Multi Remote

EL-Skyport Universal Set

(19360)

Universal receiver

Transmitter

Sychronisation socket

The standard socket 3.5 mm mini-jack (6).

N.B. Do not link ELINCHROM units by cable to other manufacturers sync outlets. ELINCHROM uses the low voltage (5V) for security reasons.

Open flash "Test"Test and Ready

Having pressed the touch pad to release a flash, the green «READY» light will

 

appear again once the unit is recharged. If the green light does not appear the

 

charge system could be defective.

 

Please contact and send to an authorized Elinchrom service.

Beep

 

Audible recharge signal

Select the function with the touch pad (8), the green indicator appears. Once recycled an acoustic signal indicates that the compact unit is ready.

5

8

10

Image 11
Contents Style FX 100/400 Table of contents FCC Class B Compliance Statement IntroductionStyle 100FX 400FX Notational Conventions Declaration of conformityDisposal and recycling CE markingTransport Safety noticePower cable Flash Tubes and Modelling lampsOperating instructions Before you startOverview of controls Control PanelMains Fuse Mains SwitchTroubleshooting Mains Supply230V Modelling lamp options Modelling LightModelling lamps and fuse 230V Version Photocell Digital power displayOpen flash TestTest and Ready Audible recharge signalCordless flash control EL-Skyport Universal Set Sychronisation socketTraining with Elinchrom lighting Beginner’s Guide To Light Technical data FeaturesEntry Level Flash Heads Pro Flash Head Pro Flash Heads Elinca sa Guarantee