Emerson Process Management HF300 instruction manual Specifications, Product Types

Page 2

HF300 Series

Instruction Manual

Form 5715

June 2007

Table 1. Specifications

Product Types

Type HF340: Standard 35 mm DIN rail mounting with filtering components.

Type HF341: Standard 35 mm DIN rail mounting without filtering components (straight through with capacitor blocking on COMM terminals).

Connections

Three 2-pin Cage-clamp style connectors accept up to 12 AWG wire

Power Requirements (Type HF340 only)

Input Current: 4−20 mA DC (nominal)

Input Voltage: At 20 milliamps DC, 2 volts above input voltage required by the field instrument (2 volt drop across filter at 20 milliamps DC)

Filter Output

Filter output is clamped at 15 volts DC. Filter load voltage requirement must not exceed 14 volts DC

Ambient Operating Temperature

−40 to 85_C (−40 to 185_F)

Ambient Relative Humidity

5 to 95%

Electromagnetic Interference (EMI)

These units have the CE mark in accordance with the European Electromagnetic Compatibility (EMC) Directive. They meet the emissions requirements of IEC 61326-1 (Edition 1.1) for Class A equipment for use in industrial locations and Class B equipment for use in domestic locations. They also meet the immunity requirements listed in table 2 below. This table is in accordance with Annex A of IEC 61326-1 for equipment intended for use in industrial locations.

Dimensions

75 mm (3 inches) long by 12.5 mm (0.5 inches) wide by 60 mm (2.4 inches) deep

Approximate Weight

0.1 kg (4 oz)

Table 2. EMC Immunity Performance Criteria

Port

Phenomenon

Basic Standard

Performance Criteria

 

 

 

 

 

Electrostatic discharge (ESD)

IEC 61000-4-2

A

 

 

 

 

Enclosure

EM field

IEC 61000-4-3

A

 

 

 

 

 

Rated power frequency magnetic field

IEC 61000-4-8

N/A(1)

 

Burst

IEC 61000-4-4

A

 

 

 

 

I/O signal/control

Surge

IEC 61000-4-5

A

 

Conducted RF

IEC 61000-4-6

A

 

 

 

 

1. Not applicable; only applicable to magnetically sensitive equipment.

The filter is normally installed near the field wiring terminals of the control system I/O. HART communication is only possible between the filter and the field instrument and at the filter COMM terminals, but not on the control system side of the filter. The filter is not designed or intended for use in the process environment. Neither the filter nor its outputs are approved for hazardous areas. However, a recommended intrinsic safety barrier can be connected between the FIELDVUE instrument and the filter in intrinsically safe installations. In most cases, if an IS barrier is used, the filter will not be needed.

Specifications

Typical specifications for the HF300 Series HART filters are shown in table 1.

Note

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use, and maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and end-user.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Scope of Manual IntroductionDescription Specifications Product TypesShields InstallationHart Wiring Connections Corrective Maintenance

HF300 specifications

Emerson Process Management’s HF300 is a sophisticated automation solution designed to enhance control and monitoring in various industrial processes. This state-of-the-art system is widely recognized for its versatility and reliability across multiple sectors, including oil and gas, chemical, and power industries.

One of the primary features of the HF300 is its advanced control algorithms, which enable precise and efficient operations. The system utilizes model predictive control (MPC) technology, allowing it to anticipate process changes and optimize performance accordingly. This proactive approach helps in minimizing deviations, ensuring that processes run smoothly and efficiently.

The HF300 is also equipped with robust data analytics capabilities. By leveraging real-time data, the system can provide actionable insights that facilitate informed decision-making. Users can easily monitor performance metrics, detect anomalies, and identify areas for improvement. This intelligence not only enhances operational efficiency but also reduces downtime and maintenance costs.

Another significant characteristic of the HF300 is its modular design. This architecture allows for scalability and flexibility, enabling organizations to tailor the system to their specific needs. Whether a company is looking to expand its operations or integrate new technologies, the HF300 can evolve alongside these changes without necessitating a complete overhaul.

The HF300 integrates seamlessly with Emerson’s DeltaV distributed control system, which further enhances its capabilities. This integration provides a unified platform for process automation, allowing for streamlined management of complex control systems. Furthermore, Emerson's commitment to cybersecurity ensures that the HF300 is equipped with robust security measures, protecting sensitive data against potential threats.

Reliability is another hallmark of the HF300. The system is designed to operate in harsh environments and is built with quality components that withstand extreme conditions. This resilience translates to minimal downtime and a longer lifecycle, enabling organizations to achieve a higher return on investment.

In conclusion, Emerson Process Management’s HF300 stands out as a powerful automation solution characterized by advanced control technologies, real-time data analytics, modularity, seamless integration, and reliability. It offers organizations the tools necessary to optimize their operations and maintain a competitive edge in today’s dynamic industrial landscape.
Top Page Image Contents