Delkin Devices 20 manual Introduction, Included Components, System Requirements

Page 3

DDREADER-20

USB 2.0 CF / SM / SD / MMC / MS Reader/Writer

 

 

Introduction

Thank you and congratulations on your purchase of the eFilm Reader-20 USB 2.0 Internal Reader/Writer. Before you begin use of this product, please take some time to read all instructions and warranty information.

The Reader-20 is designed to read and write to Compact Flash Cards Type I and II, including the IBM Microdrive, SmartMedia, Secure Digital, MultiMediaCard and Memory Stick. It is a convenient bridge between your PC and removable media applications. All media cards are accessed as removable drives. The Reader will appear as four separate drive icons in My Computer, one for each slot. A custom icon program is included to provide an identifying icon for each of the four different card slots.

Please look to our website at http://www.delkin.com for FAQs and current information on compatibility issues as well as the latest drivers.

Included Components

eFilm Reader-20

Driver CD

Manual

Type B to Type A USB Cable

Type B to 5-pin USB Cable

System Requirements

IBM compatible desktop PC

Windows XP / 2000 / ME / 98 / 98 SE

Internal 5-pin USB header, or Type A USB socket

USB 2.0 host controller w/driver

One available 3.5” drive bay

One available 4-pin floppy drive power cable

Special Handling Instructions

NEVER attempt to install or remove internal components with the power on.

Keep the Reader-20 in its static-resistant envelope until the time of installation.

Driver Software Installation for Windows®

Windows® XP / Windows ME

Driver installation is not necessary for the Windows XP and Windows Millenium (ME) operating systems. When the Reader-20 is connected to the USB port, the computer will detect the new hardware and install the required drivers automatically. The Reader-20 uses the MSD (Mass Storage Device) specification, which these operating systems support by default.

Windows® 2000 / 98 / 98 SE

Before connecting the device, you must install the device driver located on the accompa- nying CD-ROM. To avoid compatibility issues, install only the Reader-20 driver. On Windows 2000 systems, it is recommended that you install the latest service pack.

1.Start Windows and insert the Delkin Devices driver CD-ROM. Close any other applications during installation.

Delkin Devices User’s Manual

Page 1

Image 3
Contents EFilm Reader-20 Table of Contents System Requirements Driver Software Installation for WindowsIntroduction Included ComponentsHardware Installation Inserting a Card Removing a Card Accessing FilesFirst time CompactFlash card use on Windows Basic OperationFormatting a Card USB 2.0 Compatibility NotesOperational Notes Network Conflicts Windows Windows MEWindows XP Symptom Cause Solution Troubleshooting WindowsTest Drive Your Equipment Specifications SpecificationsDisclaimer Five Year Product Warranty