Flash Tube Replacement, Mounting | Bowens BWL-0353/2 (05/07)

Flash Tube Replacement

Ensure that the unit is switched off and disconnected from the mains supply and then wait thirty minutes before touching / removing flashtube.

Remove the protective cap and unwind the twisted Trigger wire from the flashtube support.

Gently pull the flashtube assembly out of the unit.

To replace the assembly, hold the flashtube as shown and taking care to support both legs of the tube, gently but firmly, push the flashtube into position, and wind the Trigger wire around the flashtube support.

Always replace with the correct flashtube assembly,

BW-2032UV coated.

BW-2030Clear (BW-2980 for 750+).

Battery Solutions

The Esprit Gemini Digital is great studio monolight, but what about if you need to work out on location?

Thanks to Bowens handy battery packs, your Bowens Esprit Gemini Digital units can leave the studio to go on location anytime, anywhere.

Included in Bowens range of battery packs are the Travel-Pak and the larger Travel-Pak+. With a fast / slow charge option to prolong the life of the battery as well as a stylish carry bag offering protection from the

elements and up to 3 inches of water; no location photographer should be without these handy packs.

Travel-Pak

BW7631 Travel-Pak+

BW7638

Also available from Bowens range of battery solutions is the TurboPak; designed to provide power for up to four Bowens Esprit Gemini Units providing up to 1600 flashes on a single charge.

Similar in proportion to the Explorer 1500, the TurboPak is just as portable but with the added benefit of being able to power four Bowens Esprit Gemini units, so with four 750Ws you have up to 3000Ws of energy at your disposal.

Unlike the Travel-Pak, the TurboPak battery is removable allowing you to charge the battery outside of the unit. Spare batteries are available which means you

can charge one battery while using another and then swap them over when used on lengthy or extended

photo-shoots.Turbo-Pak BW7655

8www.bowens.co.uk

Connecting & Using the Esprit Gemini

!!! WARNING HIGH VOLTAGE !!!

NEVER CONNECT THE ESPRIT GEMINI TO BOTH A MAINS SUPPLY AND A

BATTERY SUPPLY AT THE SAME TIME.

THIS APPLIANCE MUST BE EARTHED WHEN USED WITH MAINS.

DISCONNECT THE MAINS LEAD WHEN CHANGING MODELLING LAMPS & FLASH

TUBES.

The Esprit Gemini unit may be operated either on a mains supply or with a Bowens battery source such as the Bowens Travel-Pak.

For mains operation, the mains switch (page 4) should be in the upper position. For battery operation the switch should be in the lower position.

The centre position is OFF.

NOTE: When operated from a battery source, the modelling functions are not available.

Ensure the power source is Off.

Connect the unit using the appropriate cabling.

If using a battery source, ensure the connector locks are fully tightened. Switch the power source on, then switch on the Esprit Gemini.

The unit will charge and indicate it is ready for use by illuminating the Green READY light. Press the TEST button to check the unit fires.

Mounting

Mount the Esprit Gemini unit on selected support system.

The mounting bush on the 'L' bracket allows for two possible ways of mounting to the stand / support (Fig.3).

Method B may be found useful if the light is required to point down.

A	Figure 3	B
	Figure 3

www.bowens.co.uk 5

BWL-0353/2 (05/07) specifications

The Bowens BWL-0353/2 (05/07) is a professional-grade continuous lighting fixture that reflects Bowens' reputation for high-quality photographic and videographic equipment. Designed for both studio and on-location use, this lighting solution combines powerful performance with user-friendly features, making it an ideal choice for photographers, videographers, and visual content creators.

One of the standout features of the Bowens BWL-0353/2 is its impressive output. The fixture provides a powerful light source, ensuring that you have sufficient brightness to illuminate subjects effectively, even in larger spaces. This makes it suitable for various applications, including portrait photography, product shoots, and videography sessions. The adjustable output allows users to fine-tune the intensity of the light, providing versatility to accommodate different shooting conditions and creative requirements.

The BWL-0353/2 is designed with advanced cooling technology that prevents overheating during extended use. This ensures consistent performance while also extending the lifespan of the fixture. Its durable construction is built to withstand the rigors of daily use, making it a reliable choice for professionals who require dependable equipment.

Another notable characteristic of the Bowens BWL-0353/2 is its compatibility with a wide range of Bowens modifiers. Users can easily swap out softboxes, reflectors, and other accessories to shape and soften the light to achieve the desired look. This adaptability is crucial for photographers and videographers looking to create diverse lighting effects, whether they prefer a soft, diffused look or a more dramatic, focused beam.

In terms of usability, the BWL-0353/2 features an intuitive control interface that simplifies the adjustment of settings. Users can easily navigate through options, making real-time changes to the lighting setup without interrupting the creative process. This user-centric design enhances the overall shooting experience and allows for quick responses to changing conditions.

Furthermore, the fixture's lightweight and portable design enable easy transport between shooting locations. The Bowens BWL-0353/2 is an excellent investment for professionals seeking reliable, high-performing continuous lighting that enhances their work, ensuring that they can focus on their creative vision with confidence.