Setup
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation. It is also possible to stand this fixture using the removable feet provided.
RIGGING
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.
•When selecting installation location, take into consideration lamp replacement access and routine maintenance.
•Safety cables should always be used.
•Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
Figure 1 - Hanging Bracket
Note!
Clamp is sold separately.
Using a Color Gel
The
1)Open the clear lamp cover by removing the thumbscrew.
2)Cut a piece of gel filter to match the size of the cover or slightly larger. The size of the gel used in the illustration was a 6.5” by 6.5”.
3)Lay the gel over the opening, close cover and replace the thumbscrew securely.
6 | Revision: |