Aquatica 20065 manual Foreword, Safety Precautions

Page 2

FOREWORD

Thank you for having selected the AQUATICA Digital Camera Housing System for your underwater photography.

The AQUATICA Digital Housing is the result of a long and continuing relationship with the most demanding underwater photographers in the world. Each housing is handcrafted, quality checked and pressure tested to a 300 feet equivalent by a small group of specially trained individuals, each of whom takes the utmost pride and satisfaction in offering the best underwater camera housing in the world.

The Aquatica Digital Housing was designed for optimum technical and optical performance and to provide easy and efficient underwater access to essantials functions and controls of the Canon 7D DSLR.

This manual assumes that the user is already familiar with the Canon 7D camera. If not, please read the Canon instruction manual before attempting to use the housing.

With basic care and maintenance, your AQUATICA housing will give you a lifetime of enjoyment and satisfaction in producing underwater images.

Please read this manual carefully before using your housing for the first time and note that: whenever cited the right hand is your right when using the housing.

SAFETY PRECAUTIONS:

Improper transportation handling or use of this housing might cause a flood or malfunction.

Please read and follow the following precautions:

Store and transport the housing in a sturdy, shock proof container and avoid travelling with the camera mounted inside the housing as impact forces especially on the external push buttons will be transferred to the camera.

When travelling by air, either remove the port or open the housing to prevent pressure built up inside the housing that could force ports window to pop out or unseat O-ring seal.

Never change a port or open the housing in a location where sand or similar foreign material might come in contact with an O-ring.

Use of accessories or modifications and alterations unauthorized by the manufacturer may result in flooding or poor functioning of the controls.

Be careful when opening the housing as the pressure buildup inside the housing will exaggerate the force of the latch spring. Keep fingers away from the path of the latches.

Whenever changing ports or O-rings, perform a simple seal test with out the camera inside.

Avoid scratching the acrylic or glass ports and windows.

Make sure that all ports remain properly attached before rinsing the housing, especially when rinsing without a wired strobe make sure the Bulkhead connector is sealed with its plug.

Never attempt to operate the camera in autofocus mode if a focus gear is engaged on the lens to the housing pinion gear.

The main O-ring seals should be maintained and cleaned on a regular basis. Read and follow the Care and Maintenance section on this manual.

Ensure that the spring loaded secondary lock is properly engaged on the latches to prevent their accidental opening.

page 1

Image 2
Contents Operating Manual Safety Precautions ForewordShutter Release lever Controls in Detail Controls in Detail Attach Grip Bracket to the housing FeaturesPreparation of the Housing Lubricate the Main O-ring SealPreparation of the Lens Clean the portPreparation of the Ports Select the correct portTo close the housing simply Camera Preparation and InstallationBefore closing the housing always ensure that Lens Installation Changing a Lens Removing a LensInternal switch board circuit For Optical ConnectorsTaking a Picture Shooting tipHousing Using the HousingCare and Maintenance Changing the memory cardLatches Technical Lighting Control Warranty One year Limited Warranty