INTRODUCTION
The VR36A Video Receiver works with X10's Wireless Cameras. The Camera converts video into wireless radio frequency (RF) signals and transmits them (even through walls) to the Video Receiver which you connect to a TV anywhere in your home (up to 100 ft. away from the Camera). The Video Receiver converts the signals back to video signals which are fed through a cable to your TV's Video input jack. If you purchase additional VR36As you can view your camera(s) on more than one TV.
FCC CAUTION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturers instructions, it may cause interference to radio and television reception. It has been type tested and found to comply with the limits for remote control devices in accordance with the specifications in
•Reorient the antenna of the radio/TV experiencing the interference.
•Relocate the equipment with respect to the radio/TV.
•Move the equipment away from the radio/TV.
•Plug the equipment into an outlet on a different electrical circuit from the radio/TV experiencing the interference.
•If necessary, consult your local Dealer for additional suggestions.
NOTE: Modifications to this product will void the user's authority to operate this equipment.
CONTROLS AND CONNECTIONS
2.4 GHz Video
Antenna
Power Supply
Jack
Video Out Jack
2.4 GHz
Channel Switch
2 | 3 |