Warranty, Fine Tuning Your System | X10 Wireless Technology VK58A

FINE TUNING YOUR SYSTEM

The Wireless Video Sender usually works best with the flat faces of the antennas on the Sender and Receiver unit facing each other (i.e. in “Line of sight” - see diagram below). Sometimes, however, reflections and other effects in the home may affect the signal so that some adjustment of either the Sender or Receiver antenna may be necessary to get the best the signal.

IF YOU ARE NOT GETTING ANY SIGNAL AT ALL

Check that the CHANNEL slide switch (labeled A, B, C, D) on both units (on bottom) is set to the same letter.

If you are using coaxial TV connections from the Video Receiver, check that the TV is tuned to the same channel as the TV Channel switch on the bottom of the Video Receiver (3 or 4).

Check that the camera's remote controlled power supply is turned on (using any X10 remote control, sold separately). Note, when you first plug the power supply in, it will normally be ON.

IF THE SIGNAL IS POOR, OR THERE IS INTERFERENCE

Try changing the channel on both units. Do this by adjusting the CHANNEL slide switch on each unit to any position (A, B, C, or D). Make sure both units are set to the same letter.

WARRANTY

12 MONTH LIMITED WARRANTY

X10 WIRELESS TECHNOLOGY, INC. (X10WTI) WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10WTI AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10WTI PRODUCT IF RETURNED TO X10WTI WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.

IF SERVICE IS REQUIRED UNDER THIS WARRANTY:

1.RETURN THE DEFECTIVE UNIT POSTAGE PREPAID TO THE ADDRESS ON BACK COVER.

2.ENCLOSE A CHECK FOR $4.00 TO COVER HANDLING AND RETURN POSTAGE.

3.ENCLOSE A DATED PROOF OF PURCHASE.

4.X10 IS NOT RESPONSIBLE FOR SHIPPING DAMAGE. UNITS TO BE RETURNED SHOULD BE PACKED CAREFULLY.

THIS WARRANTY DOES NOT EXTEND TO ANY X10WTI PRODUCTS WHICH HAVE BEEN SUBJECT TO MISUSE, NEGLECT, ACCIDENT, INCORRECT WIRING OR TO USE IN VIOLATION OF OPERATING INSTRUCTIONS FURNISHED BY US, NOR EXTEND TO ANY UNITS ALTERED OR REPAIRED FOR WARRANTY DEFECT BY ANYONE OTHER THAN X10. THIS WARRANTY DOES NOT COVER ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND NO REPRESENTATIVE OR PERSON IS AUTHORIZED TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF OUR PRODUCTS.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, AND/OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO THE ORIGINAL CUSTOMER. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

VK58A specifications

The X10 Wireless Technology VK58A is an innovative product designed to enhance home automation and security systems through advanced wireless communication protocols. This device stands out for its robust feature set, making it an ideal choice for both residential and commercial use.

One of the main features of the VK58A is its user-friendly design, which allows for easy installation and integration into existing systems. This makes it accessible even for those with limited technical knowledge, offering a plug-and-play solution for enhancing home monitoring capabilities. The VK58A operates within the 2.4 GHz frequency band, a common choice for wireless devices due to its balance of range and performance.

The VK58A utilizes state-of-the-art wireless technologies that ensure reliable performance. It incorporates a bi-directional communication protocol, which allows not only control signals to be sent to the device but also for it to send feedback. This feature is essential for maintaining the integrity of commands and improving the overall responsiveness of the system.

Additionally, the VK58A is compatible with various X10 devices, allowing users to create a comprehensive home automation setup. It supports multiple devices within a single network, enabling efficient control of lighting, security cameras, and other home appliances from a central hub. The integration with mobile applications further enhances user experience, allowing for remote monitoring and control.

Security is inherently built into the VK58A with its encryption protocols, which protect user data from unauthorized access. The device's inherent ability to operate even in the presence of obstacles such as walls or furniture makes it highly reliable, ensuring that signals can be transmitted effectively throughout the covered area.

The VK58A also features low power consumption technology, minimizing the environmental impact while maximizing battery life for devices that rely on it. This characteristic not only reduces the frequency of maintenance but also appeals to eco-conscious consumers looking for sustainable options.

In conclusion, the X10 Wireless Technology VK58A is a powerful tool in the domain of wireless communication, offering a blend of user-friendliness, advanced features, and strong security measures. Whether for enhancing home security or automating daily tasks, the VK58A stands as a versatile and dependable solution in the ever-evolving landscape of smart technology.