Safety
•Do not attempt to repair, modify or disassemble FlashPath. Doing so could result in fire, electric shock or injury.
•Do not make direct contact with or touch the pins (connecting surface) of the Secure Digital Memory Card or MultiMediaCard with metal. Data could be damaged or erased by static electricity.
•Do not turn the power off while downloading data from Secure Digital Memory Card or MultiMediaCard. Doing so could damage or erase the internal data on the Secure Digital Memory Card or MultiMediaCard.
•Do not unplug or expose to vibration or impact while uploading data to or downloading data from Secure Digital Memory Card or MultiMediaCard. Doing so could damage or erase the internal data on the Secure Digital Memory Card or MultiMediaCard.
•Be sure to save data to another medium at regular intervals in case the data stored in Secure Digital Memory Card or MultiMediaCard is damaged or lost. We are not liable, however, for data saved to any medium.
•Make sure the Secure Digital Memory Card or MultiMediaCard contains no essential data or files before formatting. Failure to do so will result in loss of data.
•Do not turn off the power or touch the floppy disk drive push button while the floppy disk drive is operating. Doing so could damage or erase data in the Secure Digital Memory Card or MultiMediaCard.
•When Secure Digital Memory Card or MultiMediaCard is formatted using your digital appliance format utility, all the data saved in the Secure Digital Memory Card or MultiMediaCard is erased.
•If a strange odor, sound or smoke is emitted from the FlashPath during use, immediately turn off the power and unplug the PC power cord from the electric outlet. Failure to do so could result in fire or equipment damage. For repair, contact the place of purchase or contact our support team.
FCC Statement
FlashPath has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit other than that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
•
•
FlashPath User Guide • 17
•
•
•