1.In Radio mode, press the LEFT or RIGHT buttons (the FM frequency will increase or decrease in 0.1MHz increments) until you reach the desired frequency.
2.You can also press and hold either LEFT or RIGHT to
To select a preset station:
1.In Radio mode, press DOWN to skip forward to the next saved station in the station list.
2.Press UP to go back to the previous saved station in your station list.
Options:
This menu shows list of options available in the Radio mode. Some of these options are available on the remote or by using the menu buttons on the front of the Photo Frame.
1.Press 
and use the LEFT and RIGHT buttons to highlight the desired menu option.
2.Press 
to access the highlighted function or open its
3.Press 
once to go back to the previous screen.
4.Press 
again to revert to the Home menu.
Auto Scan: Automatically scan all FM frequencies and save the first 20 stations with strong signals to the Station List. Note: performing an Auto Scan will reset all previously saved stations in the
Station List.
Save Station: This option lets you save your 20 favorite radio stations from in the Photo Frame’s memory.
1.Select the radio station (FM frequency) that you wish to save.
2.Highlight Save Station in the Options menu and press 
.
3.A list of station presets from “Station 01” ~ “Station 20” will appear.
4.Use the UP / DOWN buttons to highlight one of the 20 station presets and press 
to save the current FM frequency to that preset station number.
5.Your new saved station will now be highlighted in the Radio screen’s list of saved stations.
27