TRENDnet User’s Guide |
|
Network
∙IP Address Mode: Choose a method to assign an IP address to your camera.
oFixed IP – If you want to assign a static or fixed IP address to the
camera, you may do so here. Your network administrator should be able to provide you with the necessary details to complete this section.
oDynamic IP (DHCP) – Allows a DHCP server to automatically assign the camera a network address.
oPPPoE – If you are using a PPPoE connection, enter your user name and password here
∙Dynamic IP: Enter the Domain Name Server addresses which translate names to IP addresses.
∙Dynamic DNS: The Dynamic DNS feature allows you to host a server (e.g. web server, FTP or Game server) using a domain that you own with a dynamically assigned IP address. Many ISPs assign IP addresses dynamically i.e. the IP address changes each time you connect and disconnect. Using a Dynamic DNS service provider, you can connect to your camera no matter what your IP address. Enter the details of your dynamic DNS service provider here.
∙HTTP Port: You may configure a second HTTP port that will allow you to connect to the camera using a standard web browser. The port can be set to a number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to 1010, users must type “http://192.168.0.100:1010” instead of only “http://192.168.0.100”.
∙uPnP & uPnP Port Forwarding: Enable these to set your camera as a universal plug n play device on your network.
© Copyright 2012 TRENDnet. All Rights Reserved.
17