TRENDnet User’s Guide |
|
5.Go to Virtual Server* section and create a new entry. Enable: Click Enable
Name: Enter the application name (eg. CameraName)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Then click Add to add the application.
*Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar.
6.Open another web browser and enter your DDNS domain and camera’s port number.
http://yourDomainName:PortNumber
7.Camera’s login page will appear.
Configure DDNS on your router
1.Go to Camera’s DDNS Ports Number section, assign a HTTP port for your camera and click Apply.
2.Login to your router’s web configuration page.
© Copyright 2012 TRENDnet. All Rights Reserved.
24