TRENDnet User’s Guide

Authentication: Here you have three options to authenticate. RTSP Authentication, HTTP Authentication, and Snapshot. Click the checkbox to enable each authentication process or leave them blank. Click Save to continue.

The camera allows users to access the video directly

For Internet Explorer, http://camera ip/directview/tvaview.cgi For Non Internet Explorer, http://camera ip/directview/tvjview.cgi

When HTTP Authentication is enabled, user name and password are required to access the direct view page.

Device Settings: Here you can change the Camera Name, click OSD to enable the Label Name and check Time Stamp to singe times into your images. The LED light has three options from the drop-down list: Power/Link, Off, or Flicker. The options are self- explanatory. Click Save to continue.

Privacy Settings: Here you can enable/disable the Privacy button function.

TV-IP672W / TV-IP672WI

The next configurable section under System is Time and Date. If you didn’t set the time and date settings in the Setup Wizard, you can change them here.

Under Time Configuration, select a Time Zone from the drop-down list. Click the checkbox next to Enable Daylight Saving to enable this function and choose either Auto Daylight Saving or Set DST Manually. Click Apply to continue.

Under Automatic Time Configuration, click the Synchronize with NTP Server checkbox if you wish to sync your W/WI with your NTP server. Click Apply to continue.