Installing the 1200HD Camera

1 Turn off the power of the 1200HD camera and place it as shown in figure

2 Make sure that there is no dust or scratches on the O- ring / O-ring contact surface before closing the rear cover. Take the hand strap out, press the rear cover, and then put the buckle over the front case

3 Push the buckle down until it clicks. Make sure that the red buckle lock buttons on both sides are popped out

CAUTION

● To avoid flooding by trapping, remove the wrist strap from 1200HD camera before installation.

● Never install or remove the 1200HD camera while the camera is ON. The ejected lens may interfere with the housing and damage the camera and lens.

● Make sure that the 1200HD camera is set parallel to the housing and not excessively slanted.

ICAL OPT

ZOO

LENS

E-7