Setting Up the Scanner
7.Press 1until you see
SCANNER
<Scanner Type
8.Press 6. You’ll see the last selection, for example
| SCANNER TYPE |
|
< | HP Smartwand | > |
|
|
|
The options for Scanner Type are listed below.
If you have this type | Select this scanner model |
No Scanner | None |
M6098 | HP Smartwand |
Nippondenso | Nippondenso |
M5763 | Photo Sciences |
M5764 | Photo Sciences |
9.Press 1or 2to display the correct scanner type, then press 6. You’ll see
SCANNER
<Scanner Type
10.Press 8twice if you want to return to the Setup menu.
3