Transcend Information ssd720 user manual Supported Operating Systems, Getting Started

Page 2

Supported Operating Systems

Supported on

Windows XP/Vista/7 and Fedora Core 14 32-bit.

Mac OS: Mac OS X Lion (10.7) or later, and Mac is produced after 2010

Note:

1.Microsoft AHCI driver is required and Microsoft AHCI mode must be enabled on your computer.

2.You must have Administrator privileges on your computer to run this utility.

Before Use

1.Updating your device may result in data loss. Therefore, we strongly recommend you back up your data before proceeding.

2.Please DO NOT unplug the device or the power source during firmware update. This may cause unpredictable damage.

3.Please DO NOT use the firmware update utility to downgrade the firmware to an older version

Preparation for Mac OS

￿A USB stick with minimum 256MB free space.

￿The image file for burning to USB stick.

￿Backup your USB data first before you restore image to USB stick. The restore operation will repartition and format your USB stick so the data in the USB stick will be lost.

Getting Started

1.Connect the Transcend SSD to your PC or laptop.

2.Double click the icon “SSD_FirmwareUpdateUtility_V10.exe” to launch the utility.

3.SSD Firmware Update Utility will automatically scan for all devices and list them in the main window.

Image 2
Contents User’s Manual Supported Operating Systems Getting StartedPage Page Page Partition and format USB stick Getting StartedPage Page Restore image to USB stick Click Image and select the source image file to restore Page Page Boot from USB stick Update FirmwarePage