Lumens Technology PS760 Descriptions of major functions, Would like to switch image sources

Chapter 7 Descriptions of major functions

7.1I would like to automatically adjust the image to have best brightness and focusing performance (Auto Tune)

1.Press [AUTO TUNE] on the remote control or control panel to adjust automatically.

7.2I would like to switch image sources

The default of image source is Live Image. Press [VGA 1] on the remote control or control panel to switch setting, and PS760 as well as audio output will switch among the following four modes in turn:

1.Live images (default)

2.VGA IN(1)

3.VGA IN(2)

4.DVD (C-Video/S-Video)

<Note> VGA IN mode will be switched to DVD mode automatically in turn when it is not connected to input equipment.

<Remark> This button is disabled in C-VIDEO Out mode.

7.3 I would like to set the image source of VGA OUT2

Press [MENU] on the remote control or control panel to enter the setting menu

1.Press [] or [] to the [Advanced] menu.

2.Press [] to enter [VGA OUT2].

3.Press [ ] or [] to select [VGA OUT(1)/VGA IN(1)/VGA IN(2)/DVD].

4.Press [MENU] to exit.

<Note> VGA IN mode will be switched to DVD mode automatically in turn when it is not connected to input equipment.

<Remark> If VGA OUT(1) is connected simultaneously, the audio output will be based on VGA OUT(1).

English - 26