Lumens Technology PC170 user manual To capture images of Descriptions

Page 42

		to capture images of Chapter 7 Descriptions of
		major functions.
8	The images	Press [AUTO TUNE] to automatically adjust to the optimal
	outputted from	brightness and focal length.
	PC170 are too bright,
	dark or vague
9	Unable to record	1 Check to see if the stored data have reached the
	images	maximum size of the SD Card.
		2 The recording to internal memory is not supported.
		Please make sure a SD card is inserted prior to video
		recording.
10	The operating steps	The operating steps in the manual may be not
	in the manual are not	applicable to the machine due to improvement in
	applicable to the	functions. Check to see if the Firmware version of your
	machine	machine is up-to-date.
		3 Please go to Lumens official website to check whether
		the latest version is available for update.
		www.Mylumens.com/goto.htm
		4 The steps to check the FW version are as below:
		4.1 Press [MENU] on the remote control or control
		panel to enter the setting menu.
		4.2 Press [], [], [], or [] to select [Setting].
		4.3 Press [ENTER] key to enter.
		4.4 Press [] or [] to select [Advanced] menu.
		4.5 View [Firmware Version].
		If you are not sure whether it is the latest version,
		please consult your distributor for advice.
		http://www.Mylumens.com/en/Request_form.php

11	How to unlock the	1. Press [Menu] on the remote control or control panel
	locked device	to enter the setting menu.
		2. Press [], [], [], or [] to select [Setting].
		3. Press [ENTER] key to enter.
		4. Press [] or [] to select [Advanced] menu.
		5. Press [] to [Lock Down].
		6. Press [] or [] to select [Off] and deactivate the
		password setting function.

English - 41

Image 42

Contents Document Camera Table of Contents Connecting to Microscope DIP Switch Settings Copyright Information Safety Instructions  Precautions  FCC Warning EN55022 CE Radiation Warning Package Contents Product Overview Relative position of the presenter and document Installation and Connections System diagramInstallation and setup Connecting to a projector or monitor Connecting to a computer and use Lumens software Connecting to an Interactive Whiteboard IWB Connect to a PC and read the SD cardConnecting to an Hdtv Connecting to a speakerConnecting to a Computer with RS232 Connecting to a TVInstalling application software Start Using Control Panel/Remote Control and Setting Menu Functions of control panel and remote controlMask Setting Menu Main menuSet up menu Image Quality Mediumةيبرعلا Mask Mode Setting Menu Factory Reset4Spotlight Mode Setting Menu Splash Setting WindowsDescriptions of major functions Would like to switch image sourcesWould like to switch the image mode Would like to make text clearer and photos more colorfulWould like to use the auto focus Would like to adjust the brightnessWould like to zoom in/out images Would like to turn on/off the lampWould like to rotate the image Setting the quality of captured imagesWould like to freeze images Want to capture imagesSetting continuous capture Would like to record videosRecording motion images Recording setup Would like to view captured/recorded imagesPlaying videos Would like to enlarge a part of the image PAN Use Remote controlWould like to delete the captured/recorded images Operate with MenuWould like to use the Mask and Spotlight function Would like to set the size of MaskSetting delay time Would like to play the slides Slide ShowWould like to reduce the image noise Projector Type Using OSD menu Would like to change the splash screenUse Compound Key Would like to use a SD card Computer-related functionsWould like to insert a photo in MS-Paint Would like to insert images in Photoshop Would like to set the PC170 as a PC CameraLumens Document Connecting to Microscope When using the control panel or remote controlDIP Switch Settings XGA output default values Sxga output Wxga output4 1080P output Troubleshooting FunctionsTo capture images of Descriptions