QuickPan III / IV Rotator Base
Tripod threaded bushing adapter
The QuickPan III / IV Rotator Bases comes with a tripod adapter bushing which ac- commodates both 1/4 inch and 3/8 inch tripod mounts.
1/4 inch Tripod
If your tripod has a 1/4 inch threaded mount, leave the brass bushing in the center hole in the bottom of the rotator as shown at right.
3/8 inch Tripod
If your tripod has 3/8 inch threaded mount, remove the brass bushing by unscrewing it in a counterclockwise direction and screw- ing it into the adjacent hole in a clockwise direction using a coin (or large screwdriver) as shown at right.
Use the spare outer hole to store the brass bushing when you're using the 3/8 inch thread. That way, you won't lose the bushing!