Flash Deflector, Using External Strobes

Flash Deflector

A flash deflector (supplied) can be installed over the back of the housing port next to the housing exterior. The deflector will deflect the camera flash when using an EV Manual Controller. The deflector will redirect the camera’s flash to the EV Controller which controls the external strobe output. To attach, push the deflector over the back of the housing port, until the deflector clips into position, blocking the camera flash.

NOTE: The deflector is not needed when an Ikelite DS digital strobe is connected (hard-wired) directly to the housing (recommended).

Using External Strobes

For the best photographic results underwater, we recommend using Ikelite External Strobes. This housing has Conversion Circuitry built into the housing back, eliminating the need for an EV Controller. The Conversion Circuitry provides real Canon TTL flash when used with an Ikelite DS Digital substrobe(s) and the #4103.51single or #4103.52 dual sync cord, connected directly to the housing.

See page 13 for DS Substrobe compatibility with the Conversion Circuitry.

Using Non-Ikelite or Ikelite Non-DS Substrobes (Substrobe 50, 100A, 200, 400) with this Housing.

The Conversion Circuitry is automatically disabled when used with a Non-Ikelite or Non-DS Substrobe. These Substrobes can be used in their manual mode utilizing any power settings provided on the Substrobe.

Using Ikelite DS Digital Strobes

For the best underwater photographic results, we recommend adding an external DS-digital strobe connected to the housing with a #4103.51TTL Sync Cord and a SA-100 Ball/socket arm (Page #11).

Ikelite DS series Substrobes are industry favorites for their warm, even coverage and lightning fast recycle time. Being farther from the camera lens, the optional DS Substrobe aids in reducing the illumination of particles in the water and helps to eliminate backscatter. When used in conjunction with the EV-Controller, the DS51Mode switch is set to the TTL setting and the EV-Controller provides ten power settings in half-stop increments.

Substrobe DS51

The Substrobe DS51covers the equivalent of a 28mm lens. It is the ideal choice when using only the camera lens with no accessory wide angle lenses attached.

	DS51	Substrobe DS51
ikelite		Actual Size
SUBSTROBE		Actual Size
	ikelite	8 cm dia x 12 cm
	ikelite	3.2" dia x 4.7"

DS161Movie Substrobe

The DS161Movie Substrobe combines all of the functionality of our renowned DS160 with a powerful 500 lumen LED video light. Three super-bright LEDs are arranged behind a special optical element to provide 45 degrees angle of coverage free of hotspots.

Using Strobes (cont.)

DS161(cont.)

The DS161 flash covers

the equivalent of an	Batt
the equivalent of an	w/Lite
18mm lens or 100	Off
degrees w/diffuser	On
degrees w/diffuser	On
installed. It is the ideal	w/Lite
installed. It is the ideal
choice when using
wide angle lenses
greater than 80 degrees.
It also features a 1.5
second recycle time and
225 flashes per full
charge.

SA-100 Ball/Socket Arm

The SA-100 system #4086.61 with its 1" diameter ball is ideal underwater. The #9571.3 extended stem mount allows easy attachment of the EV controller or flashlight mount, and drops right into the release handle. The arm system allows easy strobe placement from macro close-up to wide angle. The complete system removes with a push of the handle button.

SOS	Full	Fuel
TTL	Full	Guage
	-1	3
		3
	-2	Ready Light
		2
	-3
-4		1
	DS

DS161 Movie Substrobe

Actual Size

9.6cm dia x 17.9 cm 3.75" dia x 7"

ikelite	SA-100 Ball/Socket
	Arm #4086.61

#9571.3 Extended Stem Mount (included with SA-100 Ball/Socket arm)

Recommended Strobe Packages

DS51Substrobe Package #3944.51includes #4086.61SA-100 Arm System with Ikelite TTL sync cord.

Add a second Substrobe DS51: #3944.52 includes #4086.61SA-100 Arm System with Ikelite dual TTL sync cord.

DS160 Substrobe Package #3944.90 includes #4086.61SA-100 Arm System and 1.5 hour Smart Charger with Ikelite TTL sync cord.

Add a second Substrobe DS160: #3944.92 includes #4086.61 SA-100 Arm System and Ikelite dual TTL sync cord.

DS161Movie Substrobe Package #3945.01(Recommended) includes #4086.61SA-100 Arm System and 1.5 hour Smart Charger with Ikelite TTL sync cord.

Add a second DS161Movie Substrobe: #3945.02 includes #4086.61 SA-100 Arm System and dual Ikelite TTL sync cord.

DS200 Substrobe Package #3944.60 includes #4085.26 Arm System and 1.5 hour Smart Charger with Ikelite TTL sync cord.

NOTE: #9523.32 Dual Tray required when using two strobes.

Please Read If Using an EV-Controller

TTL flash control is not available when using an EV-Controller, and therefore an EV Controller is not recommended for use with this housing.

NOTE: Do not attach the housing hotshoe to the camera when using the EV Manual Controller. If attached, the camera flash may not fire, which is necessary to trigger the external strobe.

Complete information regarding Ikelite products and optional accessories available at www.ikelite.com

G12, G11 specifications

Ikelite has long been a prominent name in underwater photography, known for its high-quality underwater housings and accessories. The Ikelite underwater housings designed for the Canon PowerShot G12 and G11 cameras are excellent choices for both beginner and seasoned underwater photographers.

The Ikelite G12 and G11 housings are engineered for durability and functionality, allowing photographers to capture stunning images under water without compromising on camera features. Both housings are made from robust, corrosion-resistant materials, ensuring that they can withstand the harsh conditions of marine environments. The designs are also lightweight, making them easy to handle while diving.

One of the defining features of the Ikelite G12 and G11 housings is their ergonomic controls. All essential camera functions are accessible from the outside, allowing users to adjust settings such as aperture, shutter speed, and ISO without needing to remove the camera from the housing. This is particularly beneficial in dynamic underwater settings, where quick adjustments are often necessary.

The housings also feature a clear polycarbonate front for excellent visibility of the camera’s LCD screen, making it easier for photographers to frame their shots underwater. The controls are carefully placed to provide a natural feel, even when wearing dive gloves.

An important characteristic of the Ikelite G12 and G11 housings is their compatibility with a variety of Ikelite strobes and lighting systems. This allows divers to utilize external flashes and lights for enhanced illumination and color vibrancy in their underwater images. The housings provide multiple mounting options, ensuring a stable and secure fit for lighting accessories.

Another key technology integrated into these housings is the ability to withstand significant depths. Ikelite housings for the G12 and G11 can typically handle depths up to 200 feet (60 meters), making them suitable for a wide range of diving experiences from shallow coral reefs to deeper ocean explorations.

In summary, the Ikelite G12 and G11 underwater housings blend durability, ease of use, and advanced photographic capabilities, making them ideal for anyone looking to capture the beauty of underwater life. With their impressive features and reliability, they stand out as top choices for underwater enthusiasts seeking to elevate their photography experiences.