Diffuser and Deflector, Optional Accessories

Spring

Spread to Install

against housing

Diffuser and Deflector cont.		Deflector
A diffuser and deflector are		Diffuser/
		material
included with the housing. The
diffuser is white transparent
plastic. The deflector is also
white but is not transparent
and has a decal on the front.
To install the diffuser or	This edge	Port Clamp

deflector spread the port clamp at the spring end

and slide over the lens port. The white plastic should be

placed in front of the camera flash. The port clamp should be

pushed back against the front of the housing.

Diffuser

The diffuser should be installed when using the camera’s built in flash. When shooting with the camera’s built-in flash at approximately 2 feet (0.6 m) or less, the lens port on the housing may block a portion of the light from the camera’s built-in flash, creating a shadow in the lower left of the photo. If this occurs, zoom the lens slightly to eliminate the shadow. (You can test this above water)

Deflector

The deflector should be installed when using an external strobe such as the DS50 or DS125 Substrobe and EV Controller. The deflector will redirect the camera’s flash to the EV Controller which controls the external strobes output.

Optional Accessories Continued

Substrobe

DS125

Substrobe

DS50

SA-100Q

Arm

SA-100Q

Arm

EV Controller

Optional Accessories

Back O’ring #0109

O’rings last for several years if properly maintained. (See maintance) Always carry a spare.

UR/Pro Filter #6441.32

The UR/Pro underwater color correcting filter is designed to restore some of the warm colors filtered out by the water. For available light use only, not recommended for use with flash.

Use the EV Controller with a DS Substrobe

The EV Controller provides 10 manual power settings in 1/2 stop increments for the DS50 or DS125Substrobes. The EV Controller has a built-in slave which can be triggered by the camera’s built-in flash.

Substrobe Packages available

Ikelite Ball Arm Systems are provided with these packages #3944.57SubStrobe DS-50 with EV Controller #3944.77 SubStrobe DS-125 with EV Controller

Maintenance

The Ikelite Digital Housing should be given the same care and attention as your other photographic equipment. In addition to normal maintenance we recommend that the housing be returned to Ikelite periodically to be checked and pressure tested.

1. Do Not leave the camera and housing in direct sunlight for prolonged periods. Heat may damage the camera.

2. Do Not ship the camera in the housing.set 3. Before using the housing, always check the tightness of the

screw in each control knob.

Check each control gland to make sure they are tight. There is a slight chance that either could vibrate loose during travel.

4. Keep the back o’ring clean and lightly lubricated. To lubricate remove the o’ring from the back. Put a small amount of lkelite lubricant on your fingers. Draw the o’ring through your fingers to apply a light coating of lubricant. Only apply enough lubricant to make the o’ring feel slick. Do Not stretch the o’ring. This light coating of lubricant will help to keep the o’ring from drying out and will help to show a dark sealing line when the housing back is properly sealed.

5. Keep the area where the o’ring fits and the sealing surface of the housing clean.

6. Rinse the housing exterior in fresh water after each salt wa ter use. Dry with a soft cloth. Dry lens port to eliminate spotting. After several uses in salt water soak the housing in a mild soap solution, rinse and dry before storage. When storing the

Substrobe DS50

The Substrobe DS50 covers the equivalent of a 28mm lens. It is the ideal choice when using only the camera lens or the camera lens with a macro 11 accessory lens.

Substrobe DS125

The Substrobe DS125covers the equivalent of a 18mm lens, 100 degrees. It is the ideal choice when using accessory wide angle lenses greater than 28mm.

housing, remove the back o’ring, lightly lubricate and place in a plastic bag. Place the plastic bag with o’ring inside the housing for safe keeping.

CAUTION

Never use spray lubricants as the propellant ingredient can cause the plastic housing to crack.

E-900 specifications

The Ikelite E-900 is a premium underwater housing designed specifically for photographers who demand high-performance and durability during their dive adventures. Built for the Olympus E-900 camera, this housing offers exceptional functionality and reliability, making it a favorite among underwater enthusiasts and professionals alike.

One of the standout features of the Ikelite E-900 housing is its robust construction. Made from a high-quality polycarbonate material, it provides excellent resistance to impact and corrosion, ensuring long-term use even in the most challenging underwater conditions. The housing is rated for depths of up to 200 feet (60 meters), allowing divers to capture stunning images at great depths.

The Ikelite E-900 is equipped with an intuitive control layout that gives users quick access to all essential camera functions. The housing features precision-molded buttons, allowing for easy manipulation of settings like shutter speed, aperture, and exposure compensation. This ergonomic design minimizes the need for complicated adjustments while underwater, enhancing the overall shooting experience.

Furthermore, the housing supports the use of interchangeable lenses, providing photographers with the versatility to adapt to different shooting conditions. With an included lens port system, users can easily attach various macro and wide-angle lenses for more creative capture options. This feature significantly expands the photographer's toolkit in diverse underwater environments.

Another highlight of the Ikelite E-900 is its ability to work seamlessly with both manual and TTL (Through The Lens) flash systems. The housing is designed with built-in optical connectors, allowing for easy integration with Ikelite strobes and providing photographers with the ability to utilize powerful lighting setups underwater. This capability ensures well-lit compositions even in dimly lit environments.

Additionally, the housing's clear back panel offers an unobstructed view of the camera's LCD screen, which helps users navigate settings effortlessly while monitoring their framing. This transparency is particularly beneficial when checking for potential exposure issues or ensuring subjects are in focus.

The Ikelite E-900 blends advanced technology with user-friendly design, making it an excellent choice for adventure-seeking photographers. Its durable build, ease of use, and exceptional adaptability for underwater shooting make it a top contender in the underwater housing market. Whether on a casual snorkeling trip or an in-depth dive expedition, the Ikelite E-900 ensures that stunning memories are captured with clarity and precision.

Diffuser and Deflector cont.