Assembly
Pivoting Screw
Camera
Stand (2)
Wall Bracket (1)
FIGURE 1
1.Twist the Camera Stand (2) into the Wall Bracket (1).
See Figure 1.
Camera
Housing (3) 
Pivoting Screw
Camera
Stand (2)
FIGURE 2
Wires (4)
2.Screw the Pivoting Screw into the housing of the Camera. Be sure it is secure.
See Figure 2.
3.To make the Camera look more authentic, tuck the Wires (4) into the holes in the Camera Stand (2). See Figure 2.
Note: Turn pivot screw 90° if wall bracket is mounted on a vertical surface.
SKU 95153 | For technical questions, please call | Page 4 |