Ikelite SD-750 instruction manual Checking Controls, Lubricants, Turn Camera On, Lens Port

Page 2
Wide-Angle Adapter wide-angle lens

Checking Controls

Once the housing has been closed, make sure the housing controls line up with the camera's controls. If the housing controls are misaligned slightly make sure the camera hold down bolt has been tightened down firmly so the camera is flat against the tray.

Zoom Control

 

 

 

 

(NOTE:) After you have used the

 

 

 

 

housing's zoom control it must be

 

 

 

 

returned to the center position to

 

 

 

 

disengage. If the housing zoom

 

 

 

 

control is pushing the zoom lever

 

 

 

 

in either direction you cannot

-

+

-

+

take a picture or access any other

 

 

 

 

function as the camera is

 

 

 

 

receiving a signal from the

 

Zoom control

Zoom control

engaged zoom control.

 

engaged

disengaged

 

 

 

 

Lubricants

1. Ikelite provides silicone lubricant with the housing. We recommend you use only Ikelite lubricant on Ikelite productsas someother brands may cause the o'ring toswell and not sealproperly.

2. Use only enough lubricant to lightly cover control shafts and o'rings. Wipe off any excess lubricant with a clean cloth. Lubricant is not a sealant, it is used to reduce friction. Excessive lubricant can collect sand and dirt which may interfere with proper sealing.

CAUTION

Never use spray lubricants as the propellant ingredient can cause the plastic housing to crack.

Turn Camera On

(centered)

Turn the camera on and operate each of the housing controls to get a feel for using the camera in the housing. Take a few pictures above water with the camera in the housing.

5

Lens Port

Treat the glass in the lens port as a camera lens. After use, rinse and gently dry the lens port to avoid water spotting. To clean use a mild soap solution or lens cleaner.

Do not use alcohol or window cleaner on the Lens Port.

The Lens Port will accept (2) Wide-Angle Adapters. The Wide- Angle Adapter #9306.80 which is required to mount the Inon UWL-150AD Bayonet style wide-angle lens. The Wide-Angle Adapter #9306.81 is required to mount the #6420Ikelite W-20 Wide-Angle Lens and other manufacturers (67mm) screw thread style wide-angle lenses.

These lenses can be secured onto the Wide-Angle Adapter above or below water as they are designed to have water between the front of the port and the accessory lens. Make sure no air bubbles are trapped between the port and the accessory lens. Any vignetting that occurs can be eliminated by zooming the camera lens slightly. The camera's built-in flash cannot be used with wide angle

lenses. The front of the lenses are so large they block the camera's flash. To properly light subjects when using a wide angle lens an external strobe should be used. Due to the wide-angle of coverage of these lenses, the DS125 Substrobe is recommended or two DS51 Substrobes.

7

6

Diffuser & Deflector Installation

Diffuser

Housing shown with

Diffuser installed.

8

Image 2
Contents Closing the Housing Opening the HousingInstalling the Camera Lubricants Diffuser & Deflector InstallationChecking Controls Turn Camera OnUse the EV Controller with a DS Substrobe Optional AccessoriesDiffuser and Deflector Substrobe Packages availablePhoto Tips Control MaintenanceGeneral Tips Photo Tips Ikelite Limited WarrantyReturning Products for Service

SD-750 specifications

The Ikelite SD-750 is a compact underwater housing designed for the Canon PowerShot SD750 digital camera, transforming it into a robust tool for underwater photography. With its innovative design and technological features, this housing appeals to both novice and experienced divers who wish to capture stunning underwater images.

One of the standout features of the Ikelite SD-750 is its durability. Constructed from high-quality acrylic and polycarbonate, the housing can withstand depths of up to 200 feet (60 meters). This feature makes it ideal for recreational diving, snorkeling, and even professional underwater photography. The housing is also designed to be lightweight, making it suitable for travel without sacrificing the protective capabilities.

The design of the Ikelite SD-750 offers easy access to all camera controls while allowing for intuitive operation. Luminous buttons and a clear back provide excellent visibility, even in low-light underwater environments. The ergonomic design ensures that divers can easily access the shutter, zoom, and mode buttons with precision.

The SD-750 housing is equipped with a port system that supports a variety of lenses and filters, expanding the creative potential for photographers. Users can attach wide-angle or macro lenses, enhancing image quality and allowing for unique perspectives. Moreover, the housing features two built-in fiber-optic ports for connecting external strobes, improving lighting and reducing shadows in underwater images.

One of the notable technologies incorporated in the Ikelite SD-750 is its housing’s ability to accommodate the camera's natural photo capabilities. The housing retains the Canon SD750's 7.1-megapixel sensor, ensuring photographers can capture high-resolution images and vibrant colors even at depth.

Another key characteristic of the Ikelite SD-750 is its user-friendly construction. The housing utilizes a reliable double O-ring seal system for waterproof integrity, providing peace of mind for users concerned about leaks. This feature is complemented by an easy-to-use latch system, allowing for efficient operation while ensuring the camera remains securely housed.

In summary, the Ikelite SD-750 serves as an excellent companion for underwater photography. With its robustness, accessibility, and adaptability to various photography needs, it caters to a range of underwater enthusiasts—from casual snorkelers to serious divers, enhancing their photographic experiences beneath the waves.