Ikelite A2000 IS, SA-100, DS160 instruction manual Please Read If Using an EV-Controller

Page 1
Note: Closest focusing distance occurs when zoom setting is l ined up with arrow on monitor.
2

Ikelite Digital Housing

in struct

ion

manual

#6140.20 for Canon Powershot A2000 IS

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 45 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory to 200’ (60m).

Please Read

We suggest that you read this instruction booklet thoroughly before use. If you are new to underwater photography, be sure to read the General and Photo Tips sections.

We also suggest that you read the camera manual thoroughly to have a full understanding of where each camera control is located and what function each control provides.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite DS Substrobes has two user settings. One setting is for strobe selection, the other is for pre- flash or non pre-flash. This camera uses pre-flash, thus the EV- Controller should be set to the pre-flash position when used with this camera.

Initial Camera Setup 1. Set ISO to 80.

2. Set camera to “P” mode

3. Enable macro focus for close-ups, or if pictures are over- exposed. Camera does not stop down in macro mode, so if over- exposure is still present when shooting close-up, move away from the subject and zoom in.

4. Make sure flash is forced “on”

Zoom

Shutter

Release

Lid

Snap

Mode Power

Lens

Port

Lid

Snap

Opening the Housing

 

1. Lid Snaps have a Lock.

Push Forward

To open, push Lid Snap

Lid Snap Lock

Lock forward and lift

 

as shown. Keep

 

pressure on the Lid

 

Snap so it does not fly

Lift

open quickly.

 

Some lid snaps have a lot of spring tension once they go over

center, so keep a firm grip on the lid snap. Lid Snaps may be

opened one at a time.

 

Installing the Camera

 

1. Remove the back from

 

the housing. The

O' Ring

mounting tray for the

 

Front View

Thumb

Rest

Playback

Face Select

 

Flash

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ISO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Macro

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lanyard

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Single Erase

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Function/Set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back View

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

camera is secured to

 

 

 

 

 

 

the housing back.

Lid

 

Canon

 

 

Hook

 

 

 

 

 

 

 

 

Position the camera on

 

 

 

 

 

 

the tray, and using a

 

 

 

 

 

 

coin or screwdriver

 

 

 

 

 

 

(preferred), secure it

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with the mounting bolt

 

 

Mounting

 

 

which threads into the

 

 

Tray

Mounting Bolt

camera’s tripod socket.

 

 

 

CAMERA / MOUNT

CAUTION:

 

 

 

 

 

 

Some camera tripod socket threads are plastic. The mounting

tray bolt is metal. Do not cross thread or over tighten as you

may damage the camera tripod socket threads.

 

 

2. Pull out on each housing control until it stops. This will get the

controls out of the way for installing the camera.

 

 

 

 

 

4

 

 

 

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Initial Camera Setup 1. Set ISO to Please Read If Using an EV-ControllerOpening the Housing Installing the CameraChecking Controls Closing the HousingLens Port Optional AccessoriesControl Maintenance MaintenanceControl Maintenance General TipsReturning Products for Service Ikelite Limited WarrantyPhoto Tips

SA-100, A2000 IS, DS160 specifications

The Ikelite DS160 flash is a powerful underwater strobe renowned for its performance in both professional and enthusiast photography. With an impressive guide number of 32, it provides ample light to capture stunning images even in challenging conditions. The DS160 features a durable construction with a corrosion-resistant aluminum body, making it suitable for both freshwater and saltwater environments. It boasts a recycle time of just 0.6 seconds, allowing for quick shot-to-shot recovery, which is crucial when photographing fast-moving subjects. Additionally, the DS160 offers versatile lighting options with a special modeling light that makes it easier to frame shots before triggering the flash. Photographers can enjoy an adjustable power range, which allows for precise control over lighting intensity, further enhancing creative possibilities.

The Canon A2000 IS is a compact digital camera that stands out for its impressive combination of user-friendly features and high-quality image capture. It is equipped with a 10-megapixel image sensor and a 6x optical zoom lens, giving users the ability to capture detailed images both close-up and at a distance. The A2000 IS also utilizes Canon's advanced image stabilization technology, which minimizes the effects of camera shake, resulting in sharper photographs in various shooting conditions. Its straightforward interface makes it accessible for beginners, while the ability to shoot in a range of modes allows for more advanced control when desired. The camera's compact size means it can easily be carried to new adventures, making it an ideal choice for travel or underwater photography with the right housing.

The Ikelite SA-100 is an exceptional underwater housing designed for superior performance and durability. Built to accommodate a range of compact digital cameras, including models from Canon, Nikon, and Panasonic, the SA-100 provides a reliable solution for underwater exploration. This housing features a lightweight yet robust construction, ensuring excellent pressure resistance while remaining easy to handle. One of its standout characteristics is the integrated vacuum system, which allows users to perform a pre-dive check to ensure the integrity of the housing. With control access to all essential functions of the camera, the SA-100 enables users to capture stunning underwater images easily. The housing is equipped with multiple accessory ports, offering compatibility with external strobes and other equipment to further enhance photographic capability underwater. Together, the Ikelite DS160, Canon A2000 IS, and Ikelite SA-100 create an exceptional synergy for underwater photography enthusiasts, ensuring high-quality results with reliable technology.
Top Page Image Contents