Samsung VP-X300 Use a lighting apparatus to brighten the scene, Place, Memory card will not load

ENGLISH

Troubleshooting

Symptom	Possible Causes	Measure
Focus does not adjust	Focus is set to manual mode	Set focus to AUTO
automatically	Recording is being done in a dark	Use a lighting apparatus to brighten the scene
	place
	Lens is covered with condensation	Clear the lens and check the focus
The Memory card will not load	The memory card is in wrong position	Insert the memory card properly, page 33
properly	A foreign object is in the memory	Clear the memory card slot
	card slot
Colour balance of picture is not	White balance adjustment is	Set proper white balance, page 42
natural	required
Files stored in the memory card	Memory card is protected	Remove the protection tab of memory card (except
cannot be deleted	File is locked	MMC)
		Remove the lock on the file, pages 53, 60, 66, 70
Images on the LCD monitor	Ambient is too bright	Adjust the brightness and angle of LCD
appear dark	Ambient temperature is too low	Low temperatures may produce a dark LCD display
		This is not a malfunction
Rear of the LCD monitor is hot	Prolonged use of the LCD monitor.	Close the LCD monitor to turn it off, or turn your device
		off to cool down
The power turns off automatically.	If no keystroke is entered for more	-To turn on your camcorder, press the power button.
	than 5 minutes, your camcorder	And if you do not use this auto power off function, set
	automatically turns off for power	the <Auto Shut Off> to Off in the menu list. page 86
	saving purposes.
	The battery pack is almost exhausted.	-Charge the battery pack or replace it with a charged
		one.

108