Maintenance & additional information
MAINTENANCE
Cautions when storing
•For safekeeping of the camcorder, turn off the camcorder.
-Remove the battery and power adaptor.
-Remove the memory card.
Cleaning the camcorder
Before cleaning, turn off the camcorder and remove the battery and power adaptor.
•To clean the exterior
-Wipe gently with a soft dry cloth. Do not apply excessive force when cleaning. Gently rub the surface.
-Do not use benzene or thinner to clean the camcorder. The exterior coating could peel off or the case could deteriorate.
•To clean the LCD screen
Wipe very gently with a soft dry cloth. Be careful not to damage the screen.
•To clean the lens
Use a air brush to remove dust, and then wipe the lens gently with a soft cloth.
If necessary, wipe gently with lens paper or tissue.
-Mold may form if the lens is left dirty.
-If the lens looks dim, turn off the camcorder and leave it off for about 1 hour.
LCD screen
•To prolong its service life, do not rub the LCD screen with a coarse cloth.
•Be aware of the following LCD screen phenomena. They are not malfunctions.
-When you use the camcorder, the surface around the LCD screen may heat up.
-If you leave the power on for a long time, the surface around the LCD screen becomes hot.
-When using the camcorder in cold conditions, an afterimage may appear on the LCD screen.
•An LCD screen is manufactured using advanced technology which creates screens with pixel failure rates of less than 0.01%. However, a black or bright spot (red, blue, white) may appear in the center of the LCD screen and up to two spots may appear outside the center. These spots, which are normally incurred during the manufacturing process, do not affect the recorded images.