Spectra KT7002 owner manual Mode Selection, Taking Images Normal Shot Mode, Self-Timer Shot Mode

￿Mode Selection

Every time the Mode/Power button (#5) is pressed, the corresponding mode appears in the LCD display (#2), in the following sequence:

Normal Shot Power Off* Flash On/Off* Self-Timer Shot AVI Video Continuous Shot

Flash Auto* Delete All Images

Mode/Power

Power Frequency Image Compression Image Resolution Delete Single Image

*Note:

Power Off, Flash On/Off and Flash Auto Modes are disabled when using the USB cable.

Taking Images

￿Normal Shot Mode

The camera will be in Normal Shot Mode when first turned ON. It will also return to Normal Shot Mode after inactivity for 5 seconds.

Frame your subject using the viewfinder (#6).

Press the Shutter button (#3) to take a picture. The buzzer (#1) will beep and Shutter Indicator (#9) will blink. One beep sound indicates that the image was taken successfully and the 3-Digit Icon (#2k) will count up by one.

Note:

Two beep sounds indicates the camera was unable to take a picture and the Shutter Indicator (#9) will not blink. There may be insufficient light to take the image or the camera memory is full.

When the camera memory is full, the 3-Digit Icon (#2k) will display and flash for 3 seconds.

￿Self-Timer Shot Mode

In Normal Shot Mode, press Mode/Power button (#5) 3 times to choose Self-Timer Shot Mode. The LCD

display (#2) will show (#2g). The self-timer will delay for 10 seconds.

Frame your subject using the viewfinder (#6).

Press Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and flash repeatedly for 10 seconds during the count down. A long-beep tone after the last beep indicates the image was taken successfully.

￿Continuous Shot Mode

In Normal Shot Mode, press Mode/Power button (#5) 5 times to choose Continuous Shot Mode. The

LCD display (#2) will show (#2e). The camera will take 3 consecutive pictures at a time when the Shutter button (#3) is pressed.

Frame your subject using the viewfinder (#6).

Press the Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and blink repeatedly 3 times. Each time indicates a successful picture has been taken.

Taking Videos

￿AVI Video Mode

In Normal Shot Mode, press Mode/Power button (#5) 4 times to choose AVI Video Mode. LCD display

(#2) will show (#2h).

Frame your subject using the viewfinder (#6).

Press and hold the Shutter button (#3) to capture videos. The buzzer (#1) will continuously sound until the shutter button (#3) is released, or the camera memory is full. In both cases the camera will stop capturing video. The 3-Digit Icon (#2k) will count up by one when complete.

- 6 -