Samsung VP-D964Wi manual Setting the File Number, Set the Power switch to the Camera, Button

ENGLISH

Digital Still Camera Mode

Setting the File Number

✤File Number setting works only in <M.Cam> mode. ➥page 19

✤File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.

✤File numbers may be set as follows:

-<Series> : When there are existing files, the new image will be named as the next number in the sequence.

-<Reset> : When there are no files stored on the Memory Card, the file numbering starts from 0001.

✤ <M.Cam> ()

➥19

✤

✤:

-<Series> () :

					-	<Reset> (		) :			0001
1.	Set the [Power] switch to the [CAMERA].	4	M.Cam Mode				1.			[CAMERA]
2.	Set the [Mode] switch to [MEMORY].		√Memory
			Memory Type		√Memory Card
			Photo Quality		√Super Fine		2.			[MEMORY]
3.	Press the [MENU] button.		Photo Size		√1152x864
			File No.		√Series
	■ The menu list will appear.
							3.	[MENU]
4.	Move the [Zoom] lever up or down to select		ZOOM Move	OK	Select	MENU Exit		■
	<Memory>, then press the [OK] button.
5.	Move the [Zoom] lever up or down to select	6					4.		[Zoom]		<Memory> (
			M.Cam Mode					),		[OK]
	<File No.>, then press the [OK] button.		Back
			Memory Type
6.	Move the [Zoom] lever up or down to select desired		Photo Quality				5.		[Zoom]		<File No.> (
			Photo Size					),		[OK]
	option <Series> or <Reset>, then press the [OK]		File No.		Series
	button.				Reset				[Zoom]
	To exit, press the [MENU] button.						6.
7.			ZOOM Move	OK	Select	MENU Exit		<Series> (	)	<Reset> (	),
								[OK]
							7.			[MENU]
	72