ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤The amount of continuous recording time available depends on
-The type and capacity of the battery pack you are using.
-How often the Zoom function is used.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. | Attach the battery pack to the camcorder. |
| |
2. | Connect the AC Power adapter to an AC cord and connect the AC cord to a |
| |
| wall socket. |
| Power Switch |
3. | Connect the DC cable to the DC jack socket on the camcorder. | ||
4. | Turn the power switch to off, and the charging indicator will start to flash, |
| |
| showing that the battery is charging. |
| |
| Blinking time | Charging rate |
|
| Once per second | Less than 50% |
|
| Twice per second | 50% ~ 75% |
|
| Three times per second | 75% ~ 90% |
|
| Blinking stops and stays on | 90 ~ 100% |
|
| On for a second and | Error - Reset the battery pack and |
|
| off for a second | the DC cable |
|
5. When the battery is fully charged, disconnect the battery pack and the AC Power adapter from the | 4 |
camcorder.
■ Even with the power switched off, the battery pack will still discharge if it is left connected to the camcorder.
Notes
■The battery pack may be charged a little at the time of purchase.
■To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
24