Samsung D103(i), VP-D101(i), D105(i), D102D(i) Audio dubbing VP-D103i/D105i only, Dubbing sound

ENGLISH

Advanced Recording

Audio dubbing (VP-D103(i)/D105(i) only)

✤The AUDIO DUBBING function only works in PLAYER Mode.

✤You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.

✤Use the internal and external microphones or other audio equipment.

✤The original sound will not be erased.

Dubbing sound

1.Set the camcorder to PLAYER mode.

■If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder.

■When you wish to dub using the External A/V input, connect the AUDIO/VIDEO cable to the camcorder by inserting the AUDIO/VIDEO cable into the AV Jack at the right side of the camcorder.

(VP-D103i/D105i only)

-Press the MENU button, turn the MENU DIAL to highlight A/V and press the ENTER button.

-Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to select AV IN.

2.Press the (PLAY/STILL) button and find the timeframe of the scene to be dubbed.

3.Press the (PLAY/STILL) button to pause the scene.

4.Press the A.DUB button on the Remote Control.

■A.DUB will be displayed on the LCD.

■The camcorder is in a ready-to-dub state for dubbing.

5.Press the (PLAY/STILL) button to start dubbing.

■Press the (STOP) button to stop the dubbing.

Notes

USB DV

AUDIO /VIDEO

S-VIDEO

MIC

Audio (L) Audio (R)

AV IN

(VP-D103i/D105i only)

■You can not use the audio dubbing function while playing a write protected video tape.

■When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from which you wish to record. (VP-D103i/D105i only)

■You cannot dub sound on a pre-recorded tape in LP mode or 16 bit mode.

65