ENGLISH
IEEE 1394 Data Transfer
●System requirements
■CPU : faster Intel® Pentium III™ 450Mhz compatible.
■Operating system : Windows® 98SE, ME, XP, Mac OS (9.1~10.2)
■Main memory : more than 64 MB RAM
■IEEE1394
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device. ■ Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode. ■ PAUSE is displayed on the OSD.
4.Start playback on the other DV device while you monitor the picture.
5.Press the START/STOP button to start recording.
■ If you want to pause recording momentarily, press the START/STOP button again.
6.To stop recording, press the 
(STOP) button.
Notes
■When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.
■Operation are not guaranteed for all the recommanded computer environments mentioned above.
78