ENGLISH
Advanced Recording
●DATE/TIME
✤The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
✤The date and time are automatically recorded on a special data area of the tape.
1.Press the MENU button.
■ The menu list will appear.
2.Turn the MENU DIAL to highlight VIEWER and press the ENTER button.
3.Turn the MENU DIAL to highlight DATE/TIME.
4.Press the ENTER button to select the
5.Using the MENU DIAL, select the DATE/TIME mode.
■ You can choose to display - the OFF, DATE, TIME, DATE/TIME
-OFF only
-DATE only
-TIME only
-DATE & TIME
■To return to the previous menu, highlight the DATE/TIME in the middle of the and press the ENTER button.
6.To exit, press the MENU button.
Notes
■The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■The DATE/TIME will read “- -
-During playback of a blank section of a tape.
-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-When the lithium battery becomes weak or dead.
■Before you can use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 37.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER 
LCD ADJUST
DATE / TIME 
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
55