Back
Kensington lock
USB connection terminal
The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.)
For using a locking device, contact where you purchase it.
Connect a PC or an external device using a USB cable.
Down stream | Connect your digital photo frame to a |
terminal | device with a USB cable.(Compatible to USB 1.1) |
Up stream | Connect your digital photo frame to a PC's USB terminal with a |
terminal | USB cable. (Compatible to USB 2.0) |
Make sure to use the USB cable
Power terminal
Stand
Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.
A 45, 90 degree rotating stand allows both horizontal and vertical installations. If your digital photo frame is installed vertically, you can rotate your photos using the rotation function to fit to the vertical installation.
Memory Card Slot You can insert a SD card or MMC/MS/XD card into this slot to view and use the content stored on them.
SD/MMC cards larger than 2 GB may not be supported.
Sliding Prevention Supports the product so that it stays firmly in place on slippery surfaces.
Holder
Features Components | Front | Back | Side | |||
(Buttons) |
Side (Buttons)